{"title":"Enclosures","description":"","products":[{"product_id":"display-user-panel-gr35-din-espknack-ipem-nb-iot","title":"Display User Panel GR35 (DIN\/ESPKnack\/IPEM NB-IoT)","description":"\u003cp\u003eThe ESPKnack and IPEM NB-IoT feature an expansion interface, which can connect to this optional \u003cstrong\u003eDisplay User Panel\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eDisplay User Panel\u003c\/strong\u003e is designed to fit into a \u003cstrong\u003eDIN VG-GR35 Enclosure\u003c\/strong\u003e but could equally be mounted separately.\u003c\/p\u003e\n\u003cp\u003eIncludes MicroSD Connector, Tactile Buttons and LEDs.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFront Facing Panel\u003c\/li\u003e\n\u003cli\u003eTactile Buttons and LED are rear mounted\u003c\/li\u003e\n\u003cli\u003eRGB LED (WS2812 Compatible)\u003c\/li\u003e\n\u003cli\u003eMicroSD Card Holder\u003c\/li\u003e\n\u003cli\u003eType C USB Port\u003c\/li\u003e\n\u003cli\u003eOLED I2C Port\u003c\/li\u003e\n\u003cli\u003eExpansion Interface (12 way JST 1mm )\u003c\/li\u003e\n\u003cli\u003eSPI Interface (6 way JST 1mm )\u003c\/li\u003e\n\u003cli\u003ePCB Size 79mmx 58mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFurther detail and information maybe found in the \u003ca rel=\"noopener\" href=\"https:\/\/github.com\/DitroniX\/Display-User-Panel-Switches-LEDs-MicroSD\" target=\"_blank\"\u003eWiki Pages\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eInterfaces\u003c\/h2\u003e\n\u003cp\u003eFully compatible with both ESPKnack and IPEM NB-IoT.    Can also be used on the ESPKite.\u003c\/p\u003e\n\u003ch2\u003eInterfaces\u003c\/h2\u003e\n\u003cp\u003eThe two main interfaces are:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExpansion Interface (12 way JST 1mm SH Pin-to-Pin)\u003c\/li\u003e\n\u003cli\u003eSPI Interface (6 way JST 1mm SH Pin-to-Pin)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eExpansion Interface\u003c\/h3\u003e\n\u003cp\u003eThis uses a 12 way JST 1 mm socket, to connect, pin-to-pin, onto the main ESPKnack or IPEM Plus.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eDisplay User Panel\u003c\/strong\u003e could be used for other users projects in much the same way.\u003c\/p\u003e\n\u003cp\u003eConnections includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3V3, 5V and Ground\u003c\/li\u003e\n\u003cli\u003eI2C Interface\u003c\/li\u003e\n\u003cli\u003eTactile Buttons for Reset, User Program and General Purpose\u003c\/li\u003e\n\u003cli\u003eLED for User, 5V Supply and General Purpose\u003c\/li\u003e\n\u003cli\u003eUSB Interface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSPI Interface\u003c\/h3\u003e\n\u003cp\u003eThis uses a 6 way JST 1 mm socket, to connect, pin-to-pin, onto the main ESPKnack or IPEM Plus.\u003c\/p\u003e\n\u003cp\u003eThe primary use of the SPI Interface, is the connections to the MicroSD Card.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eDisplay User Panel\u003c\/strong\u003e could be used for other users projects in much the same way.\u003c\/p\u003e\n\u003cp\u003eConnections includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3V3  Ground\u003c\/li\u003e\n\u003cli\u003eSPI Interface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eUSB Type C\u003c\/h3\u003e\n\u003cp\u003eThe USB Type C socket is connected to the Expansion Interface.\u003c\/p\u003e\n\u003cp\u003eIt includes two Source-to-Sink resistors.\u003c\/p\u003e\n\u003cp\u003eTVS Unidirectional ESD and Surge Protection is included.\u003c\/p\u003e\n\u003ch2\u003eMounting\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eDisplay User Panel\u003c\/strong\u003e has been designed to fit into the optional DIN Enclosure (Clips into the top).\u003c\/p\u003e\n\u003cp\u003eWith the reverse mounted tactile buttons and LEDs, it presents a plain and clean user panel.\u003c\/p\u003e\n\u003cp\u003eFour corner holes are marked but not drilled.  This is for the user to optionally use if mounting in a non-DIN enclosure, or a 3D printed enclosure.\u003c\/p\u003e\n\u003ch2\u003eShip Kit\u003c\/h2\u003e\n\u003cp\u003eThe ship kit includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Display User Panel\u003c\/li\u003e\n\u003cli\u003e1 x 12 Way to 12 Way (pin-to-pin), JST 1mm Cable, Length approx. 100mm\u003c\/li\u003e\n\u003cli\u003e1 x 6 Way to 12 Way (pin-to-pin), JST 1mm Cable, Length approx. 100mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eMicroSD Card no included.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eSupport\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/DitroniX\/Display-User-Panel-Switches-LEDs-MicroSD\"\u003ehttps:\/\/github.com\/DitroniX\/Display-User-Panel-Switches-LEDs-MicroSD\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/DitroniX\/Display-User-Panel-Switches-LEDs-MicroSD\/wiki\"\u003ehttps:\/\/github.com\/DitroniX\/Display-User-Panel-Switches-LEDs-MicroSD\/wiki\u003c\/a\u003e\u003c\/p\u003e","brand":"DitroniX","offers":[{"title":"Default Title","offer_id":53391133213000,"sku":"Display-User-Panel-VG35","price":9.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8507\/9368\/files\/display-user-panel-gr35-dinespknackipem-nb-iot-1867325.png?v=1782753750"},{"product_id":"enclosure-din-2x15w-white-clear-vg-gr35","title":"Enclosure DIN 2x15W White-Clear VG-GR35","description":"\u003cp\u003eThis Enclosure is intended as a DIN Rail mounting and has a clear\/transparent top cover plate.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCase clips together, no screws required\u003c\/li\u003e\n\u003cli\u003ePCB can be mounted in the base and also in the top (below the transparent cover)\u003c\/li\u003e\n\u003cli\u003eTerminal Block Covers (With breakouts)\u003c\/li\u003e\n\u003cli\u003eVG-GR35\u003c\/li\u003e\n\u003cli\u003eSize: 90 x 84 x 57mm\u003c\/li\u003e\n\u003cli\u003eIntegral DIN Rail mounting on rear.\u003c\/li\u003e\n\u003cli\u003eHas two rows of 15Way Terminal Block Wire Apertures\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNo Terminal Blocks are Included.  These are provided with the Boards.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eESPKnack\u003c\/li\u003e\n\u003cli\u003eIPEM NB-IoT\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DitroniX","offers":[{"title":"Default Title","offer_id":53391133475144,"sku":"Enclosure-DIN-VG35-Clear","price":6.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8507\/9368\/files\/enclosure-din-2x15w-white-clear-vg-gr35-3119232.png?v=1782753801"},{"product_id":"espknack-kit-esp32-c6-iot-wi-fi-lora-sx1262-complete-kit","title":"ESPKnack | KIT | ESP32-C6 IoT Wi-Fi LoRa SX1262 Complete Kit","description":"\u003cp\u003e\u003cstrong\u003eESPKnack – Ideal STEM Learning Development Kit, or fully fledged project for the home, industry or commercial installations.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis product bundle is a complete ‘ESPKnack Kit’\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eESPKnack \u003c\/strong\u003ehas been designed to project versatility, from a bench STEM learning board, LoRa Dev Board, or a complete fully kitted LoRa project.\u003c\/p\u003e\n\u003cp\u003eGalvanic Isolation on both Inputs and Outputs, with multiple interfaces and expansion options.\u003c\/p\u003e\n\u003cp\u003eYou have the option to easily disable the LoRa device, so using this \u003cstrong\u003eESPKnack \u003c\/strong\u003ejust on WiFi, Bluetooth, Zigbee or Thread.\u003c\/p\u003e\n\u003cp\u003eThe options are left to your imagination, with this super \u003cstrong\u003eESPKnack\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eESPKnack - ESP32-C6 IoT Wi-Fi LoRa SX1262 Galvanically Isolated Interfaces RS485 RTC\u003c\/h3\u003e\n\u003ch5\u003e\u003cstrong\u003eESPKnack - Ideal STEM Learning Development Kit, or fully fledged project for the home, industry or commercial installations.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003ch3\u003eThis product bundle is a \u003cstrong\u003ecomplete 'ESPKnack Kit'\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul class=\"kds-ml-03\"\u003e\n\u003cli\u003e\u003cstrong\u003eESPKnack - Main Board\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanel Display\u003c\/strong\u003e GR35 Interface Board\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDIN Enclosure GR35\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"list-disc inside outside-sm kds-type kds-type-body-sm\"\u003e\n\u003cstrong\u003eBattery Holder\u003c\/strong\u003e with Switch\u003c\/li\u003e\n\u003cli class=\"list-disc inside outside-sm kds-type kds-type-body-sm\"\u003e\n\u003cstrong\u003eOLED\u003c\/strong\u003e 0.96 128x64\u003c\/li\u003e\n\u003cli class=\"list-disc inside outside-sm kds-type kds-type-body-sm\"\u003e\n\u003cstrong\u003eAntenna MHF3 2.4 GHz\u003c\/strong\u003e Foldable and Pigtail Cable\u003c\/li\u003e\n\u003cli class=\"list-disc inside outside-sm kds-type kds-type-body-sm\"\u003e\n\u003cstrong\u003eAntenna 868 MHz\u003c\/strong\u003e and MHF1 Pigtail Cable\u003c\/li\u003e\n\u003cli class=\"list-disc inside outside-sm kds-type kds-type-body-sm\"\u003e\u003cstrong\u003eRibbon Cable 12W\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"list-disc inside outside-sm kds-type kds-type-body-sm\"\u003e\u003cstrong\u003eRibbon Cable 6W\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInformation\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eESPKnack \u003c\/strong\u003ehas been designed to project versatility, from a bench STEM learning board, LoRa Dev Board, or a complete fully kitted LoRa project.\u003c\/p\u003e\n\u003cp\u003eGalvanic Isolation on both Inputs and Outputs, with multiple interfaces and expansion options.\u003c\/p\u003e\n\u003cp\u003eYou have the option to easily disable the LoRa device, so using this \u003cstrong\u003eESPKnack \u003c\/strong\u003ejust on WiFi, Bluetooth, Zigbee or Thread.\u003c\/p\u003e\n\u003cp\u003eThe options are left to your imagination, with this super \u003cstrong\u003eESPKnack\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eAdditional Information\u003c\/h3\u003e\n\u003cp\u003eDetails maybe found on \u003ca href=\"https:\/\/github.com\/DitroniX\/ESPKnack-LoRa-Isolated-I-Os-RS485-5-60V-4-20mA-Relays-DIN\"\u003eGitHub\u003c\/a\u003e \/ \u003ca href=\"https:\/\/github.com\/DitroniX\/ESPKnack-LoRa-Isolated-I-Os-RS485-5-60V-4-20mA-Relays-DIN\/wiki\"\u003eWiKi\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eWhat is ESPKnack?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eFollowing in the success of the \u003cstrong\u003eESPRanger\u003c\/strong\u003e, coupled with user and backer feedback to further expand features and capabilities in other projects, this has culminated in the \u003cstrong\u003eESPKnack\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eWhat I have done in \u003cstrong\u003eESPKnack\u003c\/strong\u003e, is to take the core of \u003cstrong\u003eESPuno Pi Zero\u003c\/strong\u003e with \u003cstrong\u003eESPRanger\u003c\/strong\u003e, and couple in, or fused, essentially Galvanic Isolation for inputs and outputs.\u003c\/p\u003e\n\u003cp\u003eThe below video is a preview of the \u003cstrong\u003eESPKnack \u003c\/strong\u003eusing a concept board with \u003cstrong\u003eESPRanger\u003c\/strong\u003e\u003cstrong\u003e.   \u003c\/strong\u003eA more detailed video will follow using the \u003cstrong\u003eESPKnack \u003c\/strong\u003eBeta Board as part of lab testing.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eESPKnack \u003c\/strong\u003ewill be the main board, together with optional Panel display board and DIN enclosure.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eESPKnack \u003c\/strong\u003ecan also be used as a standard ESP32-C6 based interface board (without LoRa), simply by not adding the LoRa enable jumper.  This give you a great all around interfacing board, using the ESP Wi-Fi, Bluetooth, Thread or ZigBee communications.\u003c\/p\u003e\n\u003ch4\u003eOverview of Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eLoRa (LoRaWAN) SX1262 Module (868MHz through to 915MHz)\u003c\/li\u003e\n\u003cli\u003eGalvanic Isolated Inputs\n\u003cul\u003e\n\u003cli\u003eIndustry Standard RS-485 (or DMX)\u003c\/li\u003e\n\u003cli\u003e4-20mA Current Loop\u003c\/li\u003e\n\u003cli\u003eDigital and Analogue Inputs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eGalvanic Isolated Outputs\n\u003cul\u003e\n\u003cli\u003eDual Relay (with NC\/NO Contacts)\u003c\/li\u003e\n\u003cli\u003eDigital or PWM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eADS1115 ADC 16bit\u003c\/li\u003e\n\u003cli\u003eDS3231SN Accurate RTC (with optional Battery Backup)\u003c\/li\u003e\n\u003cli\u003e64Kbit EEPROM\u003c\/li\u003e\n\u003cli\u003e5-60V DC Power Input SMPS (Wide Operating Voltage)\u003c\/li\u003e\n\u003cli\u003eDigital Temperature Board Sensor\u003c\/li\u003e\n\u003cli\u003eType C Interfaces (UART and MCU)\u003c\/li\u003e\n\u003cli\u003eExpansion Ports\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DitroniX","offers":[{"title":"Default Title","offer_id":53391133507912,"sku":"ESPKnack-Kit","price":74.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8507\/9368\/files\/espknack-kit-esp32-c6-iot-wi-fi-lora-sx1262-complete-kit-9106014.png?v=1782753750"},{"product_id":"enclosure-din-2x12w-white-clear-vg-gr34","title":"Enclosure DIN 2x12W White-Clear VG-GR34","description":"\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003eThis Enclosure is intended as a DIN Rail mounting and has a clear\/transparent top cover plate.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCase clips together, no screws required\u003c\/li\u003e\n\u003cli\u003ePCB can be mounted in the base and also in the top (below the transparent cover)\u003c\/li\u003e\n\u003cli\u003eTerminal Block Covers (With breakouts)\u003c\/li\u003e\n\u003cli\u003eVG-GR34\u003c\/li\u003e\n\u003cli\u003eSize: 90 x 71 x 57mm\u003c\/li\u003e\n\u003cli\u003eIntegral DIN Rail mounting on rear.\u003c\/li\u003e\n\u003cli\u003eHas two rows of 12Way Terminal Block Wire Apertures\u003c\/li\u003e\n\u003cli\u003ePart Number VG-GR34\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNo Terminal Blocks are Included.  These are provided with the Boards.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eSuitable for: \u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eIPEM Plus\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIPEM SIX\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"DitroniX","offers":[{"title":"Default Title","offer_id":53391140979016,"sku":"Enclosure-DIN-VG35-Clear-1","price":6.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8507\/9368\/files\/enclosure-din-2x12w-white-clear-vg-gr34-1806854.png?v=1782753760"},{"product_id":"enclosure-din-abs-blue-vgp41f","title":"Enclosure DIN ABS Blue VGP41F","description":"\u003cp\u003eThis super small enclosure is intended for DIN Rail mounting a PCB.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCase clips together, screws included\u003c\/li\u003e\n\u003cli\u003ePCB can be mounted in the base\u003c\/li\u003e\n\u003cli\u003eSize: 82 x 54x 327mm\u003c\/li\u003e\n\u003cli\u003eIntegral DIN Rail mounting on rear.\u003c\/li\u003e\n\u003cli\u003eHas two rows of Terminal Block Wire Apertures\u003c\/li\u003e\n\u003cli\u003ePart Number VG-P41F-Blue\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNo Terminal Blocks are Included.  These are provided with the Boards.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for: ESPKite\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"DitroniX","offers":[{"title":"Default Title","offer_id":53391141470536,"sku":"Enclosure-DIN-VG-P41F-Blue","price":5.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8507\/9368\/files\/enclosure-din-abs-blue-vgp41f-7842271.png?v=1782753803"},{"product_id":"enclosure-abs-ip65-bmc-70020-with-glands","title":"Enclosure ABS IP65 BMC 70020 with Glands","description":"\u003cp\u003eThis is a compact ABS PCB Enclosure.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBMC 70020-B2\u003c\/li\u003e\n\u003cli\u003e105 x 60 x 24mm\u003c\/li\u003e\n\u003cli\u003eIP65 (Dust and Water Jets)\u003c\/li\u003e\n\u003cli\u003eComplete with Glands, Clamps and Screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAs used on the WREN Linear Motor Controller\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"DitroniX","offers":[{"title":"Default Title","offer_id":53391142551880,"sku":"Enclosure-ABS-BMC70020B2","price":4.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8507\/9368\/files\/enclosure-abs-ip65-bmc-70020-with-glands-5451226.png?v=1782753800"},{"product_id":"enclosure-abs-ip65-waterproof-case-cover-box-clear-top","title":"Enclosure ABS IP65 Waterproof Case Cover Box Clear Top","description":"\u003cp\u003eThis is a compact ABS Waterproof PCB Enclosure.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Grey\/Clear\u003c\/li\u003e\n\u003cli\u003e85 x 58 x 33 mm\u003c\/li\u003e\n\u003cli\u003eInner: 77 x 52 x 30mm\u003c\/li\u003e\n\u003cli\u003eWaterproof Case IP65\u003c\/li\u003e\n\u003cli\u003eComplete with Silicon Lid Seal and Screws\u003c\/li\u003e\n\u003cli\u003eIndoor and Outdoor Projects\u003c\/li\u003e\n\u003cli\u003eIdeal for projects that require light or display\u003c\/li\u003e\n\u003cli\u003eSuitable for outdoor lighting solutions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCWX\u003c\/li\u003e\n\u003cli\u003eAQIX SCD40\u003c\/li\u003e\n\u003cli\u003eAQIX CD41\u003c\/li\u003e\n\u003cli\u003eAQIL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAcrylonitrile Butadiene Styrene\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"DitroniX","offers":[{"title":"Default Title","offer_id":53391142584648,"sku":"Enclosure-ABS-Waterproof-Grey-Clear","price":4.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8507\/9368\/files\/enclosure-abs-ip65-waterproof-case-cover-box-clear-top-4473635.png?v=1782753738"},{"product_id":"display-user-panel-gr34-din-ipem-plus-ipem-six","title":"Display User Panel GR34 (DIN\/IPEM Plus\/IPEM SIX)","description":"\u003cp\u003eBoards like the ESPKnack, IPEM NB-IoT, IPEM Plus and IPEM SIX feature an expansion interface, which can connect to this optional \u003cstrong\u003eDisplay User Panel\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eDisplay User Panel\u003c\/strong\u003e is designed to fit into a \u003cstrong\u003eDIN VG-GR35 Enclosure\u003c\/strong\u003e but could equally be mounted separately.\u003c\/p\u003e\n\u003cp\u003eIncludes MicroSD Connector, Tactile Buttons and LEDs.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFront Facing Panel\u003c\/li\u003e\n\u003cli\u003eTactile Buttons and LED are rear mounted\u003c\/li\u003e\n\u003cli\u003eRGB LED (WS2812 Compatible)\u003c\/li\u003e\n\u003cli\u003eMicroSD Card Holder\u003c\/li\u003e\n\u003cli\u003eType C USB Port\u003c\/li\u003e\n\u003cli\u003eOLED I2C Port\u003c\/li\u003e\n\u003cli\u003eExpansion Interface (12 way JST 1mm )\u003c\/li\u003e\n\u003cli\u003eSPI Interface (6 way JST 1mm )\u003c\/li\u003e\n\u003cli\u003ePCB Size 79mmx 58mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFurther detail and information maybe found in the \u003ca rel=\"noopener\" href=\"https:\/\/github.com\/DitroniX\/Display-User-Panel-Switches-LEDs-MicroSD\" target=\"_blank\"\u003eWiki Pages\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eInterfaces\u003c\/h2\u003e\n\u003cp\u003eFully compatible with both IPEM Plus and IPEM SIX.  Can also be used on the ESPKite.\u003c\/p\u003e\n\u003ch2\u003eInterfaces\u003c\/h2\u003e\n\u003cp\u003eThe two main interfaces are:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExpansion Interface (12 way JST 1mm SH Pin-to-Pin)\u003c\/li\u003e\n\u003cli\u003eSPI Interface (6 way JST 1mm SH Pin-to-Pin)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eExpansion Interface\u003c\/h3\u003e\n\u003cp\u003eThis uses a 12 way JST 1 mm socket, to connect, pin-to-pin, onto the main ESPKnack or IPEM Plus.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eDisplay User Panel\u003c\/strong\u003e could be used for other users projects in much the same way.\u003c\/p\u003e\n\u003cp\u003eConnections includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3V3, 5V and Ground\u003c\/li\u003e\n\u003cli\u003eI2C Interface\u003c\/li\u003e\n\u003cli\u003eTactile Buttons for Reset, User Program and General Purpose\u003c\/li\u003e\n\u003cli\u003eLED for User, 5V Supply and General Purpose\u003c\/li\u003e\n\u003cli\u003eUSB Interface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSPI Interface\u003c\/h3\u003e\n\u003cp\u003eThis uses a 6 way JST 1 mm socket, to connect, pin-to-pin, onto the main IPEM Plus and IPEM SIX.\u003c\/p\u003e\n\u003cp\u003eThe primary use of the SPI Interface, is the connections to the MicroSD Card.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eDisplay User Panel\u003c\/strong\u003e could be used for other users projects in much the same way.\u003c\/p\u003e\n\u003cp\u003eConnections includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3V3  Ground\u003c\/li\u003e\n\u003cli\u003eSPI Interface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eUSB Type C\u003c\/h3\u003e\n\u003cp\u003eThe USB Type C socket is connected to the Expansion Interface.\u003c\/p\u003e\n\u003cp\u003eIt includes two Source-to-Sink resistors.\u003c\/p\u003e\n\u003cp\u003eTVS Unidirectional ESD and Surge Protection is included.\u003c\/p\u003e\n\u003ch2\u003eMounting\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eDisplay User Panel\u003c\/strong\u003e has been designed to fit into the optional DIN Enclosure (Clips into the top).\u003c\/p\u003e\n\u003cp\u003eWith the reverse mounted tactile buttons and LEDs, it presents a plain and clean user panel.\u003c\/p\u003e\n\u003cp\u003eFour corner holes are marked but not drilled.  This is for the user to optionally use if mounting in a non-DIN enclosure, or a 3D printed enclosure.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eShip Kit\u003c\/h2\u003e\n\u003cp\u003eThe ship kit includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Display User Panel\u003c\/li\u003e\n\u003cli\u003e1 x 12 Way to 12 Way (pin-to-pin), JST 1mm Cable, Length approx. 100mm\u003c\/li\u003e\n\u003cli\u003e1 x 6 Way to 12 Way (pin-to-pin), JST 1mm Cable, Length approx. 100mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eMicroSD Card no included.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eSupport\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/DitroniX\/Display-User-Panel-Switches-LEDs-MicroSD\"\u003ehttps:\/\/github.com\/DitroniX\/Display-User-Panel-Switches-LEDs-MicroSD\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/DitroniX\/Display-User-Panel-Switches-LEDs-MicroSD\/wiki\"\u003ehttps:\/\/github.com\/DitroniX\/Display-User-Panel-Switches-LEDs-MicroSD\/wiki\u003c\/a\u003e\u003c\/p\u003e","brand":"DitroniX","offers":[{"title":"Default Title","offer_id":53391142748488,"sku":"Display-User-Panel-VG34","price":9.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8507\/9368\/files\/display-user-panel-gr34-dinipem-plusipem-six-6299281.png?v=1782753813"}],"url":"https:\/\/ditronix.net\/collections\/enclosures.oembed","provider":"DitroniX","version":"1.0","type":"link"}