{"title":"Latest Boards","description":"","products":[{"product_id":"espknack-esp32-c6-iot-wi-fi-lora-sx1262-galvanically-isolated-interfaces-rs485-rtc","title":"ESPKnack ESP32-C6 IoT Wi-Fi LoRa SX1262 Galvanically Isolated Interfaces RS485 RTC","description":"\u003cp\u003e\u003cstrong\u003eESPKnack – Ideal STEM Learning Development Kit, or fully fledged project for the home, industry or commercial installations.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eESPKnack - ESP32-C6 IoT Wi-Fi LoRa SX1262 Galvanically Isolated Interfaces RS485 RTC\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eESPKnack \u003c\/strong\u003ehas been designed to project versatility, from a bench STEM learning board, LoRa Dev Board, or a complete fully kitted LoRa project.\u003c\/p\u003e\n\u003cp\u003eGalvanic Isolation on both Inputs and Outputs, with multiple interfaces and expansion options.\u003c\/p\u003e\n\u003cp\u003eYou have the option to easily disable the LoRa device, so using this \u003cstrong\u003eESPKnack \u003c\/strong\u003ejust on WiFi, Bluetooth, Zigbee or Thread.\u003c\/p\u003e\n\u003cp\u003eThe options are left to your imagination, with this super \u003cstrong\u003eESPKnack\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat is ESPKnack?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eFollowing in the success of the \u003cstrong\u003eESPRanger\u003c\/strong\u003e, coupled with user and backer feedback to further expand features and capabilities in other projects, this has culminated in the \u003cstrong\u003eESPKnack\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eWhat I have done in \u003cstrong\u003eESPKnack\u003c\/strong\u003e, is to take the core of \u003cstrong\u003eESPuno Pi Zero\u003c\/strong\u003e with \u003cstrong\u003eESPRanger\u003c\/strong\u003e, and couple in, or fused, essentially Galvanic Isolation for inputs and outputs.\u003c\/p\u003e\n\u003cp\u003eThe below video is a preview of the \u003cstrong\u003eESPKnack \u003c\/strong\u003eusing a concept board with \u003cstrong\u003eESPRanger\u003c\/strong\u003e\u003cstrong\u003e.   \u003c\/strong\u003eA more detailed video will follow using the \u003cstrong\u003eESPKnack \u003c\/strong\u003eBeta Board as part of lab testing.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eESPKnack \u003c\/strong\u003ewill be the main board, together with optional Panel display board and DIN enclosure.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eESPKnack \u003c\/strong\u003ecan also be used as a standard ESP32-C6 based interface board (without LoRa), simply by not adding the LoRa enable jumper.  This give you a great all around interfacing board, using the ESP Wi-Fi, Bluetooth, Thread or ZigBee communications.\u003c\/p\u003e\n\u003ch4\u003eOverview of Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eLoRa (LoRaWAN) SX1262 Module (868MHz through to 915MHz)\u003c\/li\u003e\n\u003cli\u003eGalvanic Isolated Inputs\n\u003cul\u003e\n\u003cli\u003eIndustry Standard RS-485 (or DMX)\u003c\/li\u003e\n\u003cli\u003e4-20mA Current Loop\u003c\/li\u003e\n\u003cli\u003eDigital and Analogue Inputs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eGalvanic Isolated Outputs\n\u003cul\u003e\n\u003cli\u003eDual Relay (with NC\/NO Contacts)\u003c\/li\u003e\n\u003cli\u003eDigital or PWM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eADS1115 ADC 16bit\u003c\/li\u003e\n\u003cli\u003eDS3231SN Accurate RTC (with optional Battery Backup)\u003c\/li\u003e\n\u003cli\u003e64Kbit EEPROM\u003c\/li\u003e\n\u003cli\u003e5-60V DC Power Input SMPS (Wide Operating Voltage)\u003c\/li\u003e\n\u003cli\u003eDigital Temperature Board Sensor\u003c\/li\u003e\n\u003cli\u003eType C Interfaces (UART and MCU)\u003c\/li\u003e\n\u003cli\u003eExpansion Ports\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eDevices\u003c\/h4\u003e\n\u003cp\u003eThe \u003cstrong\u003eESPRanger\u003c\/strong\u003e, provides a very compact board which includes the below main features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEspressif ESP32-C6 U.FL\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eWiFi, Bluetooth, Zigbee and Thread\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEByte E22-900MM22S\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eLoRa (LoRaWAN), SX1262 module for 868MHz through to 915MHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChipanalog CA-IS2092\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eIndustry Standard Galvanic Isolated RS-485 interface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRTC DS3231SN\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eAccurate RTC (with optional Battery Backup)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-20mA Current Loop\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eHCNR200-500E - Galvanic Isolation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eADC ADS1115\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e16bit 4 Channels (Useable 3)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTI TMP102\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eDigital Temperature Board Sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFET 2N7002DW\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003ePWM\/GPIO Output Galvanic Isolation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelays SRD-05VDC-SL-CC\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e10A 250VAC or 10A 30V DC SPDT - NO\/NC - Galvanically Isolated Contacts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSiproin SSP9481\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e5 to 60V DC SMPS for wide ranging power input, providing a stable 5V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnSemi NCP167BMX330\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e5V to 3V3 DC SMPS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEEPROM P24C64C\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e64Kbit storage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eWhere can ESPKnack be used?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe \u003cstrong\u003eESPKnack\u003c\/strong\u003e board can be used in a wide range of projects and installations such as:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAgriculture\u003c\/li\u003e\n\u003cli\u003eAutomation\u003c\/li\u003e\n\u003cli\u003eCommercial\u003c\/li\u003e\n\u003cli\u003eEmergency Response\u003c\/li\u003e\n\u003cli\u003eFactories\u003c\/li\u003e\n\u003cli\u003eFarms\u003c\/li\u003e\n\u003cli\u003eGreenhouses\u003c\/li\u003e\n\u003cli\u003eHomes\u003c\/li\u003e\n\u003cli\u003eIndustry\u003c\/li\u003e\n\u003cli\u003eLivestock Monitoring\u003c\/li\u003e\n\u003cli\u003eMakers\u003c\/li\u003e\n\u003cli\u003eOff Grid Systems\u003c\/li\u003e\n\u003cli\u003eRobotics\u003c\/li\u003e\n\u003cli\u003eScientific Research\u003c\/li\u003e\n\u003cli\u003eSecurity\u003c\/li\u003e\n\u003cli\u003eShipping\u003c\/li\u003e\n\u003cli\u003eSmart systems\u003c\/li\u003e\n\u003cli\u003eSolar Farms\u003c\/li\u003e\n\u003cli\u003eSTEM Education\u003c\/li\u003e\n\u003cli\u003eSurveillance\u003c\/li\u003e\n\u003cli\u003eWind Farms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv dir=\"auto\" class=\"markdown-heading\"\u003e\n\u003ch4 dir=\"auto\" class=\"heading-element\" tabindex=\"-1\"\u003e\u003cstrong\u003eLoRa and LoRaWAN\u003c\/strong\u003e\u003c\/h4\u003e\n\u003c\/div\u003e\n\u003cp dir=\"auto\"\u003eThe main focus of the \u003cstrong\u003eESPKnack\u003c\/strong\u003e board was sensor flexibility and the ability to send this data to the outside world. LoRa provides a Long Range wireless communication technology.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eThe \u003cstrong\u003eESPKnack\u003c\/strong\u003e includes an EByte E22-900MM22S LoRa module, with Semtech SX1262. This module covers 850 to 930MHz, so allowing the \u003cstrong\u003eESPKnack\u003c\/strong\u003e to work in many countries around the World.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eExample \u003ca rel=\"nofollow\" href=\"https:\/\/www.thethingsnetwork.org\/docs\/lorawan\/frequencies-by-country\/\"\u003ebands\u003c\/a\u003e:\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eAS923 (AS1) band (920-923 MHz) in Japan, Malaysia, Singapore\u003c\/li\u003e\n\u003cli\u003eAS923 (AS2) band (915–928 MHz) in Asia\u003c\/li\u003e\n\u003cli\u003eAU915 band (915–928 MHz) in South America\u003c\/li\u003e\n\u003cli\u003eCN779 band (779-787 MHz) in China\u003c\/li\u003e\n\u003cli\u003eEU868 band (863–870 MHz) in Europe\u003c\/li\u003e\n\u003cli\u003eIN865 band (865-867 MHz) in India\u003c\/li\u003e\n\u003cli\u003eKR920 band (920-923 MHz) in Korea\u003c\/li\u003e\n\u003cli\u003eRU864 band (864-870 MHz) in Russia\u003c\/li\u003e\n\u003cli\u003eUS915 band (902–928 MHz) in North America\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003eLoRa networks supported include \u003ca rel=\"nofollow\" href=\"https:\/\/www.thethingsnetwork.org\/\"\u003eTTN\u003c\/a\u003e, \u003ca rel=\"nofollow\" href=\"https:\/\/www.helium.com\/iot\"\u003eHelium\u003c\/a\u003e, \u003ca rel=\"nofollow\" href=\"https:\/\/www.skynetiot.io\/\"\u003eSkyNet\u003c\/a\u003e, \u003ca rel=\"nofollow\" href=\"https:\/\/meshtastic.org\/\"\u003eMeshtastic\u003c\/a\u003e, \u003ca rel=\"nofollow\" href=\"https:\/\/meshcore.co.uk\/\"\u003eMeshCore\u003c\/a\u003e and \u003ca rel=\"nofollow\" href=\"https:\/\/www.chirpstack.io\/\"\u003eChirpStack\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eLoRa Local Networks\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eA LoRa network can be local and self contained. This includes 'private' networks for company or farm usage. Examples are:\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eChirpStack (Open-source LoRaWAN)\u003c\/li\u003e\n\u003cli\u003eMeshtastic (Open source, Off-grid, Decentralized, Mesh network)\u003c\/li\u003e\n\u003cli\u003eMeshCore (Open source, Multi Platform System)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003eChirpStack is an open-source LoRaWAN Network Server, providing a private network. or an integrated network with the wider LoRaWAN such as TTN.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eMeshtastic provides a way to connect nodes and propagate messages across an off-gride network.\u003c\/p\u003e\n\u003cdiv dir=\"auto\" class=\"markdown-heading\"\u003e\n\u003ch4 dir=\"auto\" class=\"heading-element\" tabindex=\"-1\"\u003eCoverage Examples:\u003c\/h4\u003e\n\u003c\/div\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003e\u003ca rel=\"nofollow\" href=\"https:\/\/ttnmapper.org\/heatmap\/\"\u003eTTN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"nofollow\" href=\"https:\/\/helium.coveragemap.net\/heatmap\/\"\u003eHelium\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"nofollow\" href=\"https:\/\/www.skynetiot.io\/en\/coverage\"\u003eSkyNet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"nofollow\" href=\"https:\/\/thingsix.coveragemap.net\/heatmap\/\"\u003eThingsIX\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"nofollow\" href=\"https:\/\/meshmap.net\/\"\u003eMeshtastic\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"nofollow\" href=\"https:\/\/www.coveragemap.net\/2024\/02\/28\/mapping-with-chirpstack\/\"\u003eChirpstack\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003eAn U.FL antenna connector is provided to allow internal or external antennas to be fitted.\u003c\/p\u003e\n\u003ch4\u003eRadio\u003c\/h4\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eESPKnack\u003c\/strong\u003e main MCU is the ESP32-C6 which includes a powerful radio module, opening up a range of IoT applications that include:\u003c\/p\u003e\n\u003cdiv dir=\"auto\" class=\"markdown-heading\"\u003e\n\u003ch4 dir=\"auto\" class=\"heading-element\" tabindex=\"-1\"\u003eWi-Fi 6\u003c\/h4\u003e\n\u003c\/div\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003e2.4 GHz (2400 ~ 2483.5 MHz)\u003c\/li\u003e\n\u003cli\u003e802.11ax (20 MHz bandwidth)\u003c\/li\u003e\n\u003cli\u003e802.11b\/g\/n (20\/40 MHz bandwidth)\u003c\/li\u003e\n\u003cli\u003eCE Max EIRP 19.81 dBm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv dir=\"auto\" class=\"markdown-heading\"\u003e\n\u003ch4 dir=\"auto\" class=\"heading-element\" tabindex=\"-1\"\u003eBluetooth\u003c\/h4\u003e\n\u003c\/div\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003e2.4 GHz (2400 ~ 2483.5 MHz)\u003c\/li\u003e\n\u003cli\u003eBluetooth LE\u003c\/li\u003e\n\u003cli\u003eBluetooth 5.3\u003c\/li\u003e\n\u003cli\u003eBluetooth Mesh\u003c\/li\u003e\n\u003cli\u003eCE Max EIRP 18.46 dBm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv dir=\"auto\" class=\"markdown-heading\"\u003e\n\u003ch4 dir=\"auto\" class=\"heading-element\" tabindex=\"-1\"\u003e\n\u003ca rel=\"nofollow\" href=\"https:\/\/www.threadgroup.org\/\"\u003eThread\u003c\/a\u003e 1.4\u003c\/h4\u003e\n\u003c\/div\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003e2.4 GHz (2405 ~ 2480 MHz)\u003c\/li\u003e\n\u003cli\u003e802.15.4\u003c\/li\u003e\n\u003cli\u003eThread Mesh\u003c\/li\u003e\n\u003cli\u003eCE Max EIRP 10.29 dBm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv dir=\"auto\" class=\"markdown-heading\"\u003e\n\u003ch4 dir=\"auto\" class=\"heading-element\" tabindex=\"-1\"\u003e\n\u003ca rel=\"nofollow\" href=\"https:\/\/csa-iot.org\/\"\u003eZigbee\u003c\/a\u003e 3.0\u003c\/h4\u003e\n\u003c\/div\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003e2.4 GHz (2405 ~ 2480 MHz)\u003c\/li\u003e\n\u003cli\u003e802.15.4\u003c\/li\u003e\n\u003cli\u003eZigbee Mesh\u003c\/li\u003e\n\u003cli\u003eCE Max EIRP 10.40 dBm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003eZigbee and mesh are expanding in an range of home, farming and industrial applications, so will be interested to see how this develops over time.\u003c\/p\u003e\n\u003ch4 dir=\"auto\"\u003eOptions\u003c\/h4\u003e\n\u003cp dir=\"auto\"\u003eA range of options are available for ESPKnack:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"auto\"\u003eESPKnack Display Board\u003c\/li\u003e\n\u003cli dir=\"auto\"\u003eDIN Enclosure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eThese will be listed to purchase.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4 dir=\"auto\"\u003eFurther Information\u003c\/h4\u003e\n\u003cp dir=\"auto\"\u003eA range of information, Project Updates, Code and Wiki pages, can be found on the \u003ca rel=\"noopener\" href=\"https:\/\/github.com\/DitroniX\/ESPKnack-LoRa-Isolated-I-Os-RS485-5-60V-4-20mA-Relays-DIN\" target=\"_blank\"\u003eESPKnack GitHub\u003c\/a\u003e\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e \u003c\/p\u003e","brand":"DitroniX","offers":[{"title":"Default Title","offer_id":53391133114696,"sku":"ESPKnack-SDK-900","price":55.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8507\/9368\/files\/espknack-esp32-c6-iot-wi-fi-lora-sx1262-galvanically-isolated-interfaces-rs485-rtc-8336147.png?v=1782807990"},{"product_id":"ipem-plus-atm90e36-esp32c5-sx1262-lora-wi-fi-iot-remote-mains-power-energy-monitor","title":"IPEM Plus ATM90E36 ESP32C5 SX1262 LoRa Wi-Fi IoT Remote Mains Power Energy Monitor","description":"\u003cp dir=\"auto\"\u003e\u003cstrong\u003eIPEM Plus\u003c\/strong\u003e is a powerful ATM90E36 REMOTE Smart Home and Industry Automation Board, and Kit.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"auto\"\u003eSelf-contained ESP32-C5 based IoT monitoring board. Ideal for local, or remoting, monitoring requirements.\u003c\/li\u003e\n\u003cli dir=\"auto\"\u003eProvides easy connectivity to Wi-Fi connections, 2.4GHz or 5GHz, plus Bluetooth, Thread and Zigbee. In addition, you may also use the inbuilt LoRa Radio IoT 850 MHz through to 930 MHz\u003c\/li\u003e\n\u003cli dir=\"auto\"\u003eHas been designed to easily monitor, and offer a flexible interface too, a whole range mains power energy installations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/DitroniX\/DitroniX\/blob\/main\/Compare%20Mains%20Power%20Energy%20Monitors.md\" title=\"DitroniX Mains Power Polyphase IoT Energy Monitor Comparisons\" rel=\"noopener\" target=\"_blank\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0972\/8507\/9368\/files\/Compare-DitroniX-Energy-Monitors-1024x106.png?v=1782664552\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eHome | Industry | Housing | Educational | Farming | Agriculture | Solar | Energy\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eUsing its 2.4GHz and 5GHz Wi-Fi, Thread and Zigbee ESP32-C5 radio module, you can use the \u003cstrong\u003eIPEM Plus\u003c\/strong\u003e to connect ta whole range of Smart Monitoring applications and projects.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eExtending further, the built-in LoRa radio opens up long range and remote monitoring.\u003c\/p\u003e\n\u003ch3 class=\"heading-element\" dir=\"auto\" tabindex=\"-1\"\u003eIPEM Continuity\u003c\/h3\u003e\n\u003cdiv class=\"markdown-heading\" dir=\"auto\"\u003e\n\u003cp\u003eFollowing in the footsteps of the original popular \u003ca href=\"https:\/\/github.com\/DitroniX\/IPEM-IoT-Power-Energy-Monitor\"\u003eIPEM boards\u003c\/a\u003e, this \u003cstrong\u003eIPEM Plus\u003c\/strong\u003e is the latest in IoT Mains Energy Monitoring for Home and Industry Automation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eIPEM Plus\u003c\/strong\u003e is the replacement to the original \u003ca href=\"https:\/\/github.com\/DitroniX\/IPEM-IoT-Power-Energy-Monitor\"\u003eIPEM boards\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3 class=\"heading-element\" dir=\"auto\" tabindex=\"-1\"\u003eCompare Energy Monitors\u003c\/h3\u003e\n\u003cp\u003eThis \u003ca href=\"https:\/\/github.com\/DitroniX\/DitroniX\/blob\/main\/Compare%20Mains%20Power%20Energy%20Monitors.md\" rel=\"noopener\" target=\"_blank\"\u003etable\u003c\/a\u003e compares the different DitroniX Power Energy Monitors.\u003c\/p\u003e\n\u003ch3\u003eInformation and Wiki\u003c\/h3\u003e\n\u003cp\u003eFull information and \u003ca href=\"https:\/\/github.com\/DitroniX\/IPEM-Plus-ESP32-C5-LoRa-LoRaWAN-IoT-Mains-Power-Energy-Monitor\/wiki\" rel=\"noopener\" target=\"_blank\"\u003eWiki\u003c\/a\u003e is available on the \u003ca href=\"https:\/\/github.com\/DitroniX\/IPEM-Plus-ESP32-C5-LoRa-LoRaWAN-IoT-Mains-Power-Energy-Monitor\" rel=\"noopener\" target=\"_blank\"\u003eDitroniX GitHub pages\u003c\/a\u003e\u003c\/p\u003e\n\u003cdiv class=\"markdown-heading\" dir=\"auto\"\u003e\n\u003ch3 class=\"heading-element\" dir=\"auto\" tabindex=\"-1\"\u003eCurrent Monitoring and Interfaces\u003c\/h3\u003e\n\u003cp\u003eExpanding the mains current sensors, either CT Clamps, or Rogowski Current Transformers, maybe connected. This allows for \u003cstrong\u003eIPEM Plus\u003c\/strong\u003e to be used for both lower current Home systems and Industrial or commercial installations, which require higher current monitoring in hundreds of Amps.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003e\n\u003cp dir=\"auto\"\u003eThe accurate \u003cstrong\u003e\u003ca href=\"https:\/\/ww1.microchip.com\/downloads\/en\/DeviceDoc\/Atmel-46004-SE-M90E36A-Datasheet.pdf\" rel=\"nofollow\"\u003eAtmel ATM90E36\u003c\/a\u003e\u003c\/strong\u003e is used for Enhanced Poly-Phase High-Performance Wide-Span Energy Metering, with fast SPI data communications to an Espressif \u003cstrong\u003eESP32-C5 MCU\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp dir=\"auto\"\u003eThe board can \u003cstrong\u003esafely monitor a range of mains AC circuits\u003c\/strong\u003e, from Single phase, Split or Dual phase (such as USA), and both types of Three phase, Star and Delta. Full 50 Hz and 60 Hz.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp dir=\"auto\"\u003eAn onboard accurate \u003cstrong\u003e16bit ADC\u003c\/strong\u003e allows for monitoring of DC voltages up to 80V.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp dir=\"auto\"\u003eThe \u003cstrong\u003eRS485\u003c\/strong\u003e port allows interfacing to other local or remote sensors and monitors.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp dir=\"auto\"\u003eAccurate \u003cstrong\u003eReal Time Clock\u003c\/strong\u003e DS3231SN, with Battery Backup Option.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp dir=\"auto\"\u003eA \u003cstrong\u003egalvanically isolated OPTO output\u003c\/strong\u003e can be used to safely connect or drive a range of external systems or devices.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp dir=\"auto\"\u003eTwo \u003cstrong\u003eexpansion ports\u003c\/strong\u003e, SPI and I2C, facilitate an optional display panel\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eMicroSD card\u003c\/strong\u003e, for buffering or logging data. This is mounted in the display panel.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp dir=\"auto\"\u003eThe IPEM Plus has been designed to be compact, with an option to fit into a \u003cstrong\u003eDIN enclosure\u003c\/strong\u003e, for cabinet or rack installations.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"markdown-heading\" dir=\"auto\"\u003e\n\u003ch3 class=\"heading-element\" dir=\"auto\" tabindex=\"-1\"\u003eSafety First\u003c\/h3\u003e\n\u003cp\u003eAs with all our boards, safety is paramount, with AC sensing being from lower voltage inputs, through galvanically isolated mains transformers. Examples are bell transformers. This allows the IPEM Plus to fully safely function at voltages below 20V.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"markdown-heading\" dir=\"auto\"\u003e\n\u003ch3 dir=\"auto\" tabindex=\"-1\"\u003eAC Current Monitoring\u003c\/h3\u003e\n\u003cp\u003eAC Mains Current on the \u003cstrong\u003eIPEM Plus\u003c\/strong\u003e, is safely monitored using an inductive non-direct connection method.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIPEM Plus\u003c\/strong\u003e has selectable inputs to be able to use either:\u003c\/p\u003e\n\u003cdiv class=\"markdown-heading\"\u003e\n\u003cul\u003e\n\u003cli class=\"heading-element\"\u003e\n\u003cstrong\u003eCT (Current Transformer) \u003c\/strong\u003e- Home and Office\n\u003cul\u003e\n\u003cli class=\"heading-element\"\u003eThis typically is by using a CT (Current Transformer), Current Clamp which can measure up to around 100A. This normally is a split core, such as using the popular YHDC SCT-013 100A-50mA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"markdown-heading\"\u003e\n\u003cul\u003e\n\u003cli class=\"heading-element\"\u003e\n\u003cstrong\u003eSplit core current transformers, or Rogowski\u003c\/strong\u003e - Commercial and Industrial\n\u003cul\u003e\n\u003cli class=\"heading-element\"\u003eFor for larger solar farms, commercial and industrial currents, heavy duty split core current transformers, or Rogowski.\u003c\/li\u003e\n\u003cli class=\"heading-element\"\u003eThe advantages of Rogowski coils, is that that are flexible air-core sensors, providing a wider, non-saturating range, ease of installation, and excellent high-frequency response.6\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003eFurther information in \u003ca href=\"https:\/\/github.com\/DitroniX\/IPEM-Plus-ESP32-C5-LoRa-LoRaWAN-IoT-Mains-Power-Energy-Monitor\/wiki\/AC-Current-and-Power-Monitoring\" rel=\"noopener\" target=\"_blank\"\u003eCurrent Monitoring can be found here\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3 class=\"heading-element\" dir=\"auto\" tabindex=\"-1\"\u003eAC Voltage Monitoring\u003c\/h3\u003e\n\u003cp\u003eAll AC Mains is safely and galvanically isolated using a low voltage transformer. Examples are bell transformers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"markdown-heading\" dir=\"auto\"\u003e\n\u003ch5 class=\"heading-element\" dir=\"auto\" tabindex=\"-1\"\u003eSupports AC Monitoring Around The \u003ca href=\"https:\/\/en.wikipedia.org\/wiki\/Mains_electricity_by_country\" rel=\"nofollow\"\u003eWorld\u003c\/a\u003e\n\u003c\/h5\u003e\n\u003c\/div\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eEurope and UK\u003c\/strong\u003e which typically is 230 V @ 50 Hz\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eWith ranges around 216 V to 253 V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eUSA and Canada\u003c\/strong\u003e which typically is 120 V or 230 V @ 60 Hz\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eWith ranges around 114 V to 126 V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eJapan\u003c\/strong\u003e which typically is 100 V @ 50 Hz or 60 Hz\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eEastern Japan is 50 Hz, and Western Japan is 60 Hz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eWorld\u003c\/strong\u003e typically is 220V-240 V @ 50 Hz\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFurther information in \u003ca href=\"https:\/\/github.com\/DitroniX\/IPEM-Plus-ESP32-C5-LoRa-LoRaWAN-IoT-Mains-Power-Energy-Monitor\/wiki\/AC-Mains-Voltage-Sense-Input\" rel=\"noopener\" target=\"_blank\"\u003eAC Voltage Monitoring can be found here\u003c\/a\u003e\u003c\/p\u003e\n\u003cdiv class=\"markdown-heading\" dir=\"auto\"\u003e\n\u003cdiv class=\"markdown-heading\" dir=\"auto\"\u003e\n\u003ch3 class=\"heading-element\" dir=\"auto\" tabindex=\"-1\"\u003eLoRa Long Range IoT Data Radio Integration\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cp dir=\"auto\"\u003eIn addition, to compliment the powerful C5 radio, the \u003cstrong\u003eIPEM Plus\u003c\/strong\u003e has an onboard LoRa SX1262 Transceiver Radio.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eThis allows \u003cstrong\u003eIPEM Plus\u003c\/strong\u003e to be also used on remote Power Energy Monitoring projects, using the integrated \u003ca href=\"https:\/\/github.com\/DitroniX\/IPEM-Plus-ESP32-C5-LoRa-LoRaWAN-IoT-Mains-Power-Energy-Monitor\/wiki\/Lora-Topology-Overview\"\u003eLoRa and LoRaWan\u003c\/a\u003e long range wireless network. This includes networks such as \u003ca href=\"https:\/\/www.thethingsnetwork.org\/\" rel=\"nofollow\"\u003eTTN\u003c\/a\u003e, \u003ca href=\"https:\/\/meshtastic.org\/\" rel=\"nofollow\"\u003eMeshtastic\u003c\/a\u003e, \u003ca href=\"https:\/\/www.helium.com\/iot\" rel=\"nofollow\"\u003eHelium\u003c\/a\u003e and \u003ca href=\"https:\/\/www.chirpstack.io\/\" rel=\"nofollow\"\u003eChirpStack\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eThe LoRa radio module operates from 850 MHz through to 930 MHz, so providing worldwide capability. This uses the LoRa module E22-900M22S, incorporating the Semtech SX1262.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eExample \u003ca href=\"https:\/\/www.thethingsnetwork.org\/docs\/lorawan\/frequencies-by-country\/\" rel=\"nofollow\"\u003ebands\u003c\/a\u003e:\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eAS923 (AS1) band (920-923 MHz) in Japan, Malaysia, Singapore\u003c\/li\u003e\n\u003cli\u003eAS923 (AS2) band (915–928 MHz) in Asia\u003c\/li\u003e\n\u003cli\u003eAU915 band (915–928 MHz) in South America\u003c\/li\u003e\n\u003cli\u003eCN779 band (779-787 MHz) in China\u003c\/li\u003e\n\u003cli\u003eEU868 band (863–870 MHz) in Europe\u003c\/li\u003e\n\u003cli\u003eIN865 band (865-867 MHz) in India\u003c\/li\u003e\n\u003cli\u003eKR920 band (920-923 MHz) in Korea\u003c\/li\u003e\n\u003cli\u003eRU864 band (864-870 MHz) in Russia\u003c\/li\u003e\n\u003cli\u003eUS915 band (902–928 MHz) in North America\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"markdown-heading\" dir=\"auto\"\u003e\n\u003ch3 class=\"heading-element\" dir=\"auto\" tabindex=\"-1\"\u003eLoRa Long Satellite IoT\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cp dir=\"auto\"\u003eThe \u003cstrong\u003eIPEM Plus LoRa Wireless includes the expanded Satellite IoT range, \u003c\/strong\u003eenabling direct-to-satellite IoT connectivity, with suitable installation antenna.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3 dir=\"auto\"\u003e\u003cstrong\u003eOptions\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDisplay User Panel\u003c\/li\u003e\n\u003cli\u003eDIN Enclosure\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DitroniX","offers":[{"title":"Default Title","offer_id":53391133245768,"sku":"IPEM-Plus-ESP32C5-LoRa","price":55.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8507\/9368\/files\/ipem-plus-atm90e36-esp32c5-sx1262-lora-wi-fi-iot-remote-mains-power-energy-monitor-6176612.png?v=1782753809"},{"product_id":"espknack-kit-esp32-c6-iot-wi-fi-lora-sx1262-complete-kit","title":"ESPKnack | KIT | ESP32-C6 IoT Wi-Fi LoRa SX1262 Complete Kit","description":"\u003cp\u003e\u003cstrong\u003eESPKnack – Ideal STEM Learning Development Kit, or fully fledged project for the home, industry or commercial installations.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis product bundle is a complete ‘ESPKnack Kit’\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eESPKnack \u003c\/strong\u003ehas been designed to project versatility, from a bench STEM learning board, LoRa Dev Board, or a complete fully kitted LoRa project.\u003c\/p\u003e\n\u003cp\u003eGalvanic Isolation on both Inputs and Outputs, with multiple interfaces and expansion options.\u003c\/p\u003e\n\u003cp\u003eYou have the option to easily disable the LoRa device, so using this \u003cstrong\u003eESPKnack \u003c\/strong\u003ejust on WiFi, Bluetooth, Zigbee or Thread.\u003c\/p\u003e\n\u003cp\u003eThe options are left to your imagination, with this super \u003cstrong\u003eESPKnack\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eESPKnack - ESP32-C6 IoT Wi-Fi LoRa SX1262 Galvanically Isolated Interfaces RS485 RTC\u003c\/h3\u003e\n\u003ch5\u003e\u003cstrong\u003eESPKnack - Ideal STEM Learning Development Kit, or fully fledged project for the home, industry or commercial installations.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003ch3\u003eThis product bundle is a \u003cstrong\u003ecomplete 'ESPKnack Kit'\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul class=\"kds-ml-03\"\u003e\n\u003cli\u003e\u003cstrong\u003eESPKnack - Main Board\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanel Display\u003c\/strong\u003e GR35 Interface Board\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDIN Enclosure GR35\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"list-disc inside outside-sm kds-type kds-type-body-sm\"\u003e\n\u003cstrong\u003eBattery Holder\u003c\/strong\u003e with Switch\u003c\/li\u003e\n\u003cli class=\"list-disc inside outside-sm kds-type kds-type-body-sm\"\u003e\n\u003cstrong\u003eOLED\u003c\/strong\u003e 0.96 128x64\u003c\/li\u003e\n\u003cli class=\"list-disc inside outside-sm kds-type kds-type-body-sm\"\u003e\n\u003cstrong\u003eAntenna MHF3 2.4 GHz\u003c\/strong\u003e Foldable and Pigtail Cable\u003c\/li\u003e\n\u003cli class=\"list-disc inside outside-sm kds-type kds-type-body-sm\"\u003e\n\u003cstrong\u003eAntenna 868 MHz\u003c\/strong\u003e and MHF1 Pigtail Cable\u003c\/li\u003e\n\u003cli class=\"list-disc inside outside-sm kds-type kds-type-body-sm\"\u003e\u003cstrong\u003eRibbon Cable 12W\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"list-disc inside outside-sm kds-type kds-type-body-sm\"\u003e\u003cstrong\u003eRibbon Cable 6W\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInformation\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eESPKnack \u003c\/strong\u003ehas been designed to project versatility, from a bench STEM learning board, LoRa Dev Board, or a complete fully kitted LoRa project.\u003c\/p\u003e\n\u003cp\u003eGalvanic Isolation on both Inputs and Outputs, with multiple interfaces and expansion options.\u003c\/p\u003e\n\u003cp\u003eYou have the option to easily disable the LoRa device, so using this \u003cstrong\u003eESPKnack \u003c\/strong\u003ejust on WiFi, Bluetooth, Zigbee or Thread.\u003c\/p\u003e\n\u003cp\u003eThe options are left to your imagination, with this super \u003cstrong\u003eESPKnack\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eAdditional Information\u003c\/h3\u003e\n\u003cp\u003eDetails maybe found on \u003ca href=\"https:\/\/github.com\/DitroniX\/ESPKnack-LoRa-Isolated-I-Os-RS485-5-60V-4-20mA-Relays-DIN\"\u003eGitHub\u003c\/a\u003e \/ \u003ca href=\"https:\/\/github.com\/DitroniX\/ESPKnack-LoRa-Isolated-I-Os-RS485-5-60V-4-20mA-Relays-DIN\/wiki\"\u003eWiKi\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eWhat is ESPKnack?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eFollowing in the success of the \u003cstrong\u003eESPRanger\u003c\/strong\u003e, coupled with user and backer feedback to further expand features and capabilities in other projects, this has culminated in the \u003cstrong\u003eESPKnack\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eWhat I have done in \u003cstrong\u003eESPKnack\u003c\/strong\u003e, is to take the core of \u003cstrong\u003eESPuno Pi Zero\u003c\/strong\u003e with \u003cstrong\u003eESPRanger\u003c\/strong\u003e, and couple in, or fused, essentially Galvanic Isolation for inputs and outputs.\u003c\/p\u003e\n\u003cp\u003eThe below video is a preview of the \u003cstrong\u003eESPKnack \u003c\/strong\u003eusing a concept board with \u003cstrong\u003eESPRanger\u003c\/strong\u003e\u003cstrong\u003e.   \u003c\/strong\u003eA more detailed video will follow using the \u003cstrong\u003eESPKnack \u003c\/strong\u003eBeta Board as part of lab testing.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eESPKnack \u003c\/strong\u003ewill be the main board, together with optional Panel display board and DIN enclosure.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eESPKnack \u003c\/strong\u003ecan also be used as a standard ESP32-C6 based interface board (without LoRa), simply by not adding the LoRa enable jumper.  This give you a great all around interfacing board, using the ESP Wi-Fi, Bluetooth, Thread or ZigBee communications.\u003c\/p\u003e\n\u003ch4\u003eOverview of Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eLoRa (LoRaWAN) SX1262 Module (868MHz through to 915MHz)\u003c\/li\u003e\n\u003cli\u003eGalvanic Isolated Inputs\n\u003cul\u003e\n\u003cli\u003eIndustry Standard RS-485 (or DMX)\u003c\/li\u003e\n\u003cli\u003e4-20mA Current Loop\u003c\/li\u003e\n\u003cli\u003eDigital and Analogue Inputs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eGalvanic Isolated Outputs\n\u003cul\u003e\n\u003cli\u003eDual Relay (with NC\/NO Contacts)\u003c\/li\u003e\n\u003cli\u003eDigital or PWM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eADS1115 ADC 16bit\u003c\/li\u003e\n\u003cli\u003eDS3231SN Accurate RTC (with optional Battery Backup)\u003c\/li\u003e\n\u003cli\u003e64Kbit EEPROM\u003c\/li\u003e\n\u003cli\u003e5-60V DC Power Input SMPS (Wide Operating Voltage)\u003c\/li\u003e\n\u003cli\u003eDigital Temperature Board Sensor\u003c\/li\u003e\n\u003cli\u003eType C Interfaces (UART and MCU)\u003c\/li\u003e\n\u003cli\u003eExpansion Ports\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DitroniX","offers":[{"title":"Default Title","offer_id":53391133507912,"sku":"ESPKnack-Kit","price":74.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8507\/9368\/files\/espknack-kit-esp32-c6-iot-wi-fi-lora-sx1262-complete-kit-9106014.png?v=1782753750"},{"product_id":"ipem-six-esp32c5-int-dual-atm90e32-iot-mains-power-energy-monitor","title":"IPEM SIX | ESP32C5 (INT) | DUAL ATM90E32 IoT Mains Power Energy Monitor","description":"\u003cp\u003e\u003cstrong\u003eIPEM SIX\u003c\/strong\u003e is a self-contained, powerful DUAL ATM90E32 based, Smart Home and Industry Automation, Real-Time \u003ca href=\"https:\/\/github.com\/DitroniX\/IPEM-SIX-ESP32C5-ATM90E32-IoT-Mains-Power-Energy-Monitor\/wiki\/What-is-a-Power-Energy-Monitor%3F\"\u003eMains Power Energy Monitor Board\u003c\/a\u003e, and Kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIPEM SIX C5\u003c\/strong\u003e provides a complete SIX channel energy monitoring platform.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariant IPEM SIX – ESP32-C5-WROOM-1 (INT)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eVariants:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eIPEM SIX with Internal Antenna (ESP32-C5-WROOM-1)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eIPEM SIX with External Antenna via U.FL (ESP32-C5-WROOM-1U)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/DitroniX\/DitroniX\/blob\/main\/Compare%20Mains%20Power%20Energy%20Monitors.md\" title=\"DitroniX Mains Power Polyphase IoT Energy Monitor Comparisons\" rel=\"noopener\" target=\"_blank\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0972\/8507\/9368\/files\/Compare-DitroniX-Energy-Monitors-1024x106.png?v=1782664552\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003e✅ 6 Independent Current Channels for either CT Clamps or Rogowski Coil\u003cbr\u003e✅ Dual ATM90E32 Polyphase Metering\u003cbr\u003e✅ Import\/Export Detection on Each Channel and Bank\u003cbr\u003e✅ Phases 1, 2 and 3, Delta 3P3W\u003cbr\u003e✅ Per-channel energy tracking\u003cbr\u003e✅ Per-bank Energy Tracking\u003cbr\u003e✅ Home Assistant native integration (ESPHome)\u003cbr\u003e✅ WiFi diagnostics\u003cbr\u003e✅ Health Monitoring\u003cbr\u003e✅ AC\/DC Powered (Like original IPEM)\u003cbr\u003e✅ Configurable Load Alerts\u003cbr\u003e✅ OTA updates (ESPHome or your Preferred Firmware)\u003cbr\u003e✅ ESP32-C5 performance platform 2.4GHz and 5GHz bands\u003cbr\u003e✅ OPTO Input\u003cbr\u003e✅ ADC Input ADS1115\u003cbr\u003e✅ GPIO Input\/Output\u003cbr\u003e✅ Terminal Block Connections (Coloured)\u003c\/p\u003e\n\u003cp\u003eDesigned as a professional-grade residential and small commercial energy monitoring solution.\u003c\/p\u003e\n\u003cdiv dir=\"auto\" class=\"markdown-heading\"\u003e\n\u003ch2 data-sourcepos=\"64:1-64:16\" dir=\"auto\" class=\"heading-element\"\u003eAC Monitoring\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cp data-sourcepos=\"65:1-65:114\" dir=\"auto\"\u003eAll AC Mains is safely and galvanically isolated using a low voltage transformer. Examples are bell transformers.\u003c\/p\u003e\n\u003ch3 data-sourcepos=\"67:1-67:105\" dir=\"auto\" class=\"heading-element\"\u003eSupports AC Monitoring Around The \u003ca rel=\"nofollow\" href=\"https:\/\/en.wikipedia.org\/wiki\/Mains_electricity_by_country\"\u003eWorld\u003c\/a\u003e\n\u003c\/h3\u003e\n\u003cul data-sourcepos=\"69:1-78:0\" dir=\"auto\"\u003e\n\u003cli data-sourcepos=\"69:1-71:4\"\u003e\n\u003cp data-sourcepos=\"69:5-69:54\" dir=\"auto\"\u003e\u003cstrong\u003eEurope and UK\u003c\/strong\u003e which typically is 230 V @ 50 Hz\u003c\/p\u003e\n\u003cul data-sourcepos=\"70:5-71:4\" dir=\"auto\"\u003e\n\u003cli data-sourcepos=\"70:5-71:4\"\u003eWith ranges around 216 V to 253 V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli data-sourcepos=\"72:1-74:0\"\u003e\n\u003cp data-sourcepos=\"72:5-72:64\" dir=\"auto\"\u003e\u003cstrong\u003eUSA and Canada\u003c\/strong\u003e which typically is 120 V or 230 V @ 60 Hz\u003c\/p\u003e\n\u003cul data-sourcepos=\"73:5-74:0\" dir=\"auto\"\u003e\n\u003cli data-sourcepos=\"73:5-74:0\"\u003eWith ranges around 114 V to 126 V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli data-sourcepos=\"75:1-76:58\"\u003e\n\u003cp data-sourcepos=\"75:5-75:55\" dir=\"auto\"\u003e\u003cstrong\u003eJapan\u003c\/strong\u003e which typically is 100 V @ 50 Hz or 60 Hz\u003c\/p\u003e\n\u003cul data-sourcepos=\"76:5-76:58\" dir=\"auto\"\u003e\n\u003cli data-sourcepos=\"76:5-76:58\"\u003eEastern Japan is 50 Hz, and Western Japan is 60 Hz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli data-sourcepos=\"77:1-78:0\"\u003e\n\u003cp data-sourcepos=\"77:5-77:45\" dir=\"auto\"\u003e\u003cstrong\u003eWorld\u003c\/strong\u003e typically is 220V-240 V @ 50 Hz\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-sourcepos=\"79:1-79:31\" dir=\"auto\" class=\"heading-element\"\u003eWhere can IPEM SIX be used?\u003c\/h3\u003e\n\u003cp data-sourcepos=\"81:1-81:81\" dir=\"auto\"\u003eThe IPEM SIX board can be used in a number of projects and installations such as:\u003c\/p\u003e\n\u003cul data-sourcepos=\"83:1-98:0\" dir=\"auto\"\u003e\n\u003cli data-sourcepos=\"83:1-83:8\"\u003eHome\u003c\/li\u003e\n\u003cli data-sourcepos=\"84:1-84:13\"\u003eEducation\u003c\/li\u003e\n\u003cli data-sourcepos=\"85:1-85:11\"\u003eOffices\u003c\/li\u003e\n\u003cli data-sourcepos=\"86:1-86:14\"\u003eCommercial\u003c\/li\u003e\n\u003cli data-sourcepos=\"87:1-87:13\"\u003eFactories\u003c\/li\u003e\n\u003cli data-sourcepos=\"88:1-88:9\"\u003eFarms\u003c\/li\u003e\n\u003cli data-sourcepos=\"89:1-89:15\"\u003eEV Charging\u003c\/li\u003e\n\u003cli data-sourcepos=\"90:1-90:18\"\u003eSmart Metering\u003c\/li\u003e\n\u003cli data-sourcepos=\"91:1-91:16\"\u003eGreenhouses\u003c\/li\u003e\n\u003cli data-sourcepos=\"92:1-92:14\"\u003eFactories\u003c\/li\u003e\n\u003cli data-sourcepos=\"93:1-93:14\"\u003eIndustry\u003c\/li\u003e\n\u003cli data-sourcepos=\"94:1-94:16\"\u003eSolar Farms\u003c\/li\u003e\n\u003cli data-sourcepos=\"95:1-95:15\"\u003eWind Farms\u003c\/li\u003e\n\u003cli data-sourcepos=\"96:1-98:0\"\u003eOff Grid Systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv dir=\"auto\" class=\"markdown-heading\"\u003e\n\u003ch3 dir=\"auto\" class=\"heading-element\" tabindex=\"-1\"\u003eCurrent Monitoring and Interfaces\u003c\/h3\u003e\n\u003cp\u003eExpanding the mains current sensors, either CT Clamps, or Rogowski Current Transformers, maybe connected. This allows for \u003cstrong\u003eIPEM SIX \u003c\/strong\u003eto be used for both lower current Home systems and Industrial or commercial installations, which require higher current monitoring in hundreds of Amps.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\" class=\"markdown-heading\"\u003e\n\u003ch3 dir=\"auto\" class=\"heading-element\" tabindex=\"-1\"\u003eSafety First\u003c\/h3\u003e\n\u003cp\u003eAs with all our boards, safety is paramount, with AC sensing being from lower voltage inputs, through galvanically isolated mains transformers. Examples are bell transformers. This allows the IPEM Plus to fully safely function at voltages below 20V.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\" class=\"markdown-heading\"\u003e\n\u003ch3 dir=\"auto\" tabindex=\"-1\"\u003eAC Current Monitoring\u003c\/h3\u003e\n\u003cp\u003eAC Mains Current on the \u003cstrong\u003eIPEM SIX\u003c\/strong\u003e, is safely monitored using an inductive non-direct connection method.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIPEM SIX \u003c\/strong\u003ehas selectable inputs to be able to use either:\u003c\/p\u003e\n\u003cdiv class=\"markdown-heading\"\u003e\n\u003cul\u003e\n\u003cli class=\"heading-element\"\u003e\n\u003cstrong\u003eCT (Current Transformer) \u003c\/strong\u003e- Home and Office\n\u003cul\u003e\n\u003cli class=\"heading-element\"\u003eThis typically is by using a CT (Current Transformer), Current Clamp which can measure up to around 100A. This normally is a split core, such as using the popular YHDC SCT-013 100A-50mA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"markdown-heading\"\u003e\n\u003cul\u003e\n\u003cli class=\"heading-element\"\u003e\n\u003cstrong\u003eSplit core current transformers, or Rogowski\u003c\/strong\u003e - Commercial and Industrial\n\u003cul\u003e\n\u003cli class=\"heading-element\"\u003eFor for larger solar farms, commercial and industrial currents, heavy duty split core current transformers, or Rogowski.\u003c\/li\u003e\n\u003cli class=\"heading-element\"\u003eThe advantages of Rogowski coils, is that that are flexible air-core sensors, providing a wider, non-saturating range, ease of installation, and excellent high-frequency response.6\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003eFurther information in \u003ca rel=\"noopener\" href=\"https:\/\/github.com\/DitroniX\/IPEM-SIX-ESP32C5-ATM90E32-IoT-Mains-Power-Energy-Monitor\/wiki\/AC-Current-and-Power-Monitoring\" target=\"_blank\"\u003eCurrent Monitoring can be found here\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\" class=\"markdown-heading\"\u003e\n\u003ch3 dir=\"auto\"\u003e\u003cstrong\u003eOptions\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ditronix.net\/product\/display-user-panel-gr34-din-ipem-plus-ipem-six\/\"\u003eDisplay User Panel\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ditronix.net\/product\/enclosure-din-2x12w-white-clear-vg-gr34\/\"\u003eDIN Enclosure\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eIn the Box\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIPEM SIX\u003c\/li\u003e\n\u003cli\u003e2mm Jumpers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"DitroniX","offers":[{"title":"Default Title","offer_id":53391144452424,"sku":"IPEM-SIX -INT","price":55.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8507\/9368\/files\/ipem-six-esp32c5-int-dual-atm90e32-iot-mains-power-energy-monitor-1232397.png?v=1782753763"},{"product_id":"ipem-six-esp32c5-ufl-dual-atm90e32-iot-mains-power-energy-monitor","title":"IPEM SIX | ESP32C5 (UFL) | DUAL ATM90E32 IoT Mains Power Energy Monitor","description":"\u003cp\u003e\u003cstrong\u003eIPEM SIX\u003c\/strong\u003e is a self-contained, powerful DUAL ATM90E32 based, Smart Home and Industry Automation, Real-Time \u003ca href=\"https:\/\/github.com\/DitroniX\/IPEM-SIX-ESP32C5-ATM90E32-IoT-Mains-Power-Energy-Monitor\/wiki\/What-is-a-Power-Energy-Monitor%3F\"\u003eMains Power Energy Monitor Board\u003c\/a\u003e, and Kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIPEM SIX C5\u003c\/strong\u003e provides a complete SIX channel energy monitoring platform.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariant IPEM SIX – ESP32-C5-WROOM-1U (UFL)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eVariants:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIPEM SIX with Internal Antenna (ESP32-C5-WROOM-1)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPEM SIX with External Antenna via U.FL (ESP32-C5-WROOM-1U)\u003c\/strong\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/DitroniX\/DitroniX\/blob\/main\/Compare%20Mains%20Power%20Energy%20Monitors.md\" title=\"DitroniX Mains Power Polyphase IoT Energy Monitor Comparisons\" rel=\"noopener\" target=\"_blank\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0972\/8507\/9368\/files\/Compare-DitroniX-Energy-Monitors-1024x106.png?v=1782664552\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003e✅ 6 Independent Current Channels for either CT Clamps or Rogowski Coil\u003cbr\u003e✅ Dual ATM90E32 Polyphase Metering\u003cbr\u003e✅ Import\/Export Detection on Each Channel and Bank\u003cbr\u003e✅ Phases 1, 2 and 3, Delta 3P3W\u003cbr\u003e✅ Per-channel energy tracking\u003cbr\u003e✅ Per-bank Energy Tracking\u003cbr\u003e✅ Home Assistant native integration (ESPHome)\u003cbr\u003e✅ WiFi diagnostics\u003cbr\u003e✅ Health Monitoring\u003cbr\u003e✅ AC\/DC Powered (Like original IPEM)\u003cbr\u003e✅ Configurable Load Alerts\u003cbr\u003e✅ OTA updates (ESPHome or your Preferred Firmware)\u003cbr\u003e✅ ESP32-C5 performance platform 2.4GHz and 5GHz bands\u003cbr\u003e✅ OPTO Input\u003cbr\u003e✅ ADC Input ADS1115\u003cbr\u003e✅ GPIO Input\/Output\u003cbr\u003e✅ Terminal Block Connections (Coloured)\u003c\/p\u003e\n\u003cp\u003eDesigned as a professional-grade residential and small commercial energy monitoring solution.\u003c\/p\u003e\n\u003cdiv dir=\"auto\" class=\"markdown-heading\"\u003e\n\u003ch2 data-sourcepos=\"64:1-64:16\" dir=\"auto\" class=\"heading-element\"\u003eAC Monitoring\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cp data-sourcepos=\"65:1-65:114\" dir=\"auto\"\u003eAll AC Mains is safely and galvanically isolated using a low voltage transformer. Examples are bell transformers.\u003c\/p\u003e\n\u003ch3 data-sourcepos=\"67:1-67:105\" dir=\"auto\" class=\"heading-element\"\u003eSupports AC Monitoring Around The \u003ca rel=\"nofollow\" href=\"https:\/\/en.wikipedia.org\/wiki\/Mains_electricity_by_country\"\u003eWorld\u003c\/a\u003e\n\u003c\/h3\u003e\n\u003cul data-sourcepos=\"69:1-78:0\" dir=\"auto\"\u003e\n\u003cli data-sourcepos=\"69:1-71:4\"\u003e\n\u003cp data-sourcepos=\"69:5-69:54\" dir=\"auto\"\u003e\u003cstrong\u003eEurope and UK\u003c\/strong\u003e which typically is 230 V @ 50 Hz\u003c\/p\u003e\n\u003cul data-sourcepos=\"70:5-71:4\" dir=\"auto\"\u003e\n\u003cli data-sourcepos=\"70:5-71:4\"\u003eWith ranges around 216 V to 253 V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli data-sourcepos=\"72:1-74:0\"\u003e\n\u003cp data-sourcepos=\"72:5-72:64\" dir=\"auto\"\u003e\u003cstrong\u003eUSA and Canada\u003c\/strong\u003e which typically is 120 V or 230 V @ 60 Hz\u003c\/p\u003e\n\u003cul data-sourcepos=\"73:5-74:0\" dir=\"auto\"\u003e\n\u003cli data-sourcepos=\"73:5-74:0\"\u003eWith ranges around 114 V to 126 V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli data-sourcepos=\"75:1-76:58\"\u003e\n\u003cp data-sourcepos=\"75:5-75:55\" dir=\"auto\"\u003e\u003cstrong\u003eJapan\u003c\/strong\u003e which typically is 100 V @ 50 Hz or 60 Hz\u003c\/p\u003e\n\u003cul data-sourcepos=\"76:5-76:58\" dir=\"auto\"\u003e\n\u003cli data-sourcepos=\"76:5-76:58\"\u003eEastern Japan is 50 Hz, and Western Japan is 60 Hz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli data-sourcepos=\"77:1-78:0\"\u003e\n\u003cp data-sourcepos=\"77:5-77:45\" dir=\"auto\"\u003e\u003cstrong\u003eWorld\u003c\/strong\u003e typically is 220V-240 V @ 50 Hz\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-sourcepos=\"79:1-79:31\" dir=\"auto\" class=\"heading-element\"\u003eWhere can IPEM SIX be used?\u003c\/h3\u003e\n\u003cp data-sourcepos=\"81:1-81:81\" dir=\"auto\"\u003eThe IPEM SIX board can be used in a number of projects and installations such as:\u003c\/p\u003e\n\u003cul data-sourcepos=\"83:1-98:0\" dir=\"auto\"\u003e\n\u003cli data-sourcepos=\"83:1-83:8\"\u003eHome\u003c\/li\u003e\n\u003cli data-sourcepos=\"84:1-84:13\"\u003eEducation\u003c\/li\u003e\n\u003cli data-sourcepos=\"85:1-85:11\"\u003eOffices\u003c\/li\u003e\n\u003cli data-sourcepos=\"86:1-86:14\"\u003eCommercial\u003c\/li\u003e\n\u003cli data-sourcepos=\"87:1-87:13\"\u003eFactories\u003c\/li\u003e\n\u003cli data-sourcepos=\"88:1-88:9\"\u003eFarms\u003c\/li\u003e\n\u003cli data-sourcepos=\"89:1-89:15\"\u003eEV Charging\u003c\/li\u003e\n\u003cli data-sourcepos=\"90:1-90:18\"\u003eSmart Metering\u003c\/li\u003e\n\u003cli data-sourcepos=\"91:1-91:16\"\u003eGreenhouses\u003c\/li\u003e\n\u003cli data-sourcepos=\"92:1-92:14\"\u003eFactories\u003c\/li\u003e\n\u003cli data-sourcepos=\"93:1-93:14\"\u003eIndustry\u003c\/li\u003e\n\u003cli data-sourcepos=\"94:1-94:16\"\u003eSolar Farms\u003c\/li\u003e\n\u003cli data-sourcepos=\"95:1-95:15\"\u003eWind Farms\u003c\/li\u003e\n\u003cli data-sourcepos=\"96:1-98:0\"\u003eOff Grid Systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv dir=\"auto\" class=\"markdown-heading\"\u003e\n\u003ch3 dir=\"auto\" class=\"heading-element\" tabindex=\"-1\"\u003eCurrent Monitoring and Interfaces\u003c\/h3\u003e\n\u003cp\u003eExpanding the mains current sensors, either CT Clamps, or Rogowski Current Transformers, maybe connected. This allows for \u003cstrong\u003eIPEM SIX \u003c\/strong\u003eto be used for both lower current Home systems and Industrial or commercial installations, which require higher current monitoring in hundreds of Amps.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\" class=\"markdown-heading\"\u003e\n\u003ch3 dir=\"auto\" class=\"heading-element\" tabindex=\"-1\"\u003eSafety First\u003c\/h3\u003e\n\u003cp\u003eAs with all our boards, safety is paramount, with AC sensing being from lower voltage inputs, through galvanically isolated mains transformers. Examples are bell transformers. This allows the IPEM Plus to fully safely function at voltages below 20V.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\" class=\"markdown-heading\"\u003e\n\u003ch3 dir=\"auto\" tabindex=\"-1\"\u003eAC Current Monitoring\u003c\/h3\u003e\n\u003cp\u003eAC Mains Current on the \u003cstrong\u003eIPEM SIX\u003c\/strong\u003e, is safely monitored using an inductive non-direct connection method.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIPEM SIX \u003c\/strong\u003ehas selectable inputs to be able to use either:\u003c\/p\u003e\n\u003cdiv class=\"markdown-heading\"\u003e\n\u003cul\u003e\n\u003cli class=\"heading-element\"\u003e\n\u003cstrong\u003eCT (Current Transformer) \u003c\/strong\u003e- Home and Office\n\u003cul\u003e\n\u003cli class=\"heading-element\"\u003eThis typically is by using a CT (Current Transformer), Current Clamp which can measure up to around 100A. This normally is a split core, such as using the popular YHDC SCT-013 100A-50mA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"markdown-heading\"\u003e\n\u003cul\u003e\n\u003cli class=\"heading-element\"\u003e\n\u003cstrong\u003eSplit core current transformers, or Rogowski\u003c\/strong\u003e - Commercial and Industrial\n\u003cul\u003e\n\u003cli class=\"heading-element\"\u003eFor for larger solar farms, commercial and industrial currents, heavy duty split core current transformers, or Rogowski.\u003c\/li\u003e\n\u003cli class=\"heading-element\"\u003eThe advantages of Rogowski coils, is that that are flexible air-core sensors, providing a wider, non-saturating range, ease of installation, and excellent high-frequency response.6\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003eFurther information in \u003ca rel=\"noopener\" href=\"https:\/\/github.com\/DitroniX\/IPEM-SIX-ESP32C5-ATM90E32-IoT-Mains-Power-Energy-Monitor\/wiki\/AC-Current-and-Power-Monitoring\" target=\"_blank\"\u003eCurrent Monitoring can be found here\u003c\/a\u003e\u003ca rel=\"noopener\" href=\"https:\/\/github.com\/DitroniX\/IPEM-SIX-ESP32C5-ATM90E32-IoT-Mains-Power-Energy-Monitor\" target=\"_blank\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\" class=\"markdown-heading\"\u003e\n\u003ch3 dir=\"auto\"\u003e\u003cstrong\u003eOptions\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDisplay User Panel\u003c\/li\u003e\n\u003cli\u003eDIN Enclosure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eIn the Box\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIPEM SIX\u003c\/li\u003e\n\u003cli\u003e2mm Jumpers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"DitroniX","offers":[{"title":"Default Title","offer_id":53391144485192,"sku":"IPEM-SIX -UFL","price":55.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8507\/9368\/files\/ipem-six-esp32c5-ufl-dual-atm90e32-iot-mains-power-energy-monitor-4193006.png?v=1782811060"},{"product_id":"ipem-nb-iot-atm90e36-esp32c5-sim7070g-gprs-iot-lte-m-gnss-mains-power-energy-monitor","title":"IPEM NB-IOT ATM90E36 ESP32C5 SIM7070G GPRS IoT LTE-M GNSS Mains Power Energy Monitor","description":"\u003cdiv class=\"cl-preview-section\"\u003e\n\u003cp\u003e\u003cstrong\u003eIPEM NB-IoT\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a self-contained, powerful ATM90E36 based, Smart Home and Industry Automation, Real-Time\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/DitroniX\/IPEM-NBIoT-ESP32C5-ATM90E36-SIM7070G-GPRS-IoT-Mains-Power-Energy-Monitor\/wiki\/What-is-NB%E2%80%90IoT%3F\"\u003eMains Power Energy Monitor\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eBoard, and Kit. No soldering required.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/DitroniX\/DitroniX\/blob\/main\/Compare%20Mains%20Power%20Energy%20Monitors.md\" target=\"_blank\" title=\"DitroniX Mains Power Polyphase IoT Energy Monitor Comparisons\" rel=\"noopener\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0972\/8507\/9368\/files\/Compare-DitroniX-Energy-Monitors-1024x106.png?v=1782664552\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"cl-preview-section\"\u003e\n\u003ch3 id=\"nb-iot-technology\"\u003eNB-IoT Technology\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"cl-preview-section\"\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIPEM NB-IoT\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eincorporates the SIM7070G, which is a compact, low-power, global multi-band cellular module, supporting NB-IoT, Cat-M (LTE-M), and GPRS (2G) technologies.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"cl-preview-section\"\u003e\n\u003ch3 id=\"integrated-gnss-for-satellite-navigation\"\u003eIntegrated GNSS for Satellite Navigation\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"cl-preview-section\"\u003e\n\u003cp\u003eThe SIM7070G also includes a GNSS receiver for GPS, GLONASS, Galileo and BeiDou, Satellite positioning.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"cl-preview-section\"\u003e\n\u003ch3 id=\"supported-protocols\"\u003eSupported Protocols\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"cl-preview-section\"\u003e\n\u003cp\u003eProtocols supported include: TCP, UDP, HTTP, HTTPS, TLS, DTLS, FTP, PING, LWM2M, COAP and MQTT\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"cl-preview-section\"\u003e\n\u003ch3 id=\"at-commands\"\u003eAT Commands\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"cl-preview-section\"\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIPEM NB-IoT\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSIM7070G is controlled via a comprehensive set of AT commands. This makes firware development easier by handling complex network protocols internally.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"cl-preview-section\"\u003e\n\u003cp\u003eControl of the SIM7070G is straight forward using Arduino IDE, or PlatformIO.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"cl-preview-section\"\u003e\n\u003ch3 id=\"standalone-or-integrated-remote\"\u003eStandalone or Integrated Remote\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"cl-preview-section\"\u003e\n\u003cp\u003e\u003cstrong\u003eIPEM NB-IoT\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ehas been designed to easily monitor, and offer a flexible interface too, a whole range Mains AC Power installations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"cl-preview-section\"\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIPEM NB-IoT\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a ‘standalone board’, where its ESP32-C5, interfaces with ESPHome firmware (as an example)… If preferred, you could easily send MQTT messages. As it is ESP based, it will just power up and work. No waiting to boot up.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"cl-preview-section\"\u003e\n\u003cp\u003e\u003cstrong\u003eIPEM NB-IoT\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ecan run locally, such as via Home Assistant, Domoticz etc., or via an IoT remote service, or gateway to your system. It is totally down the user as to which option is taken.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"cl-preview-section\"\u003e\n\u003cp\u003eFirmware is typically developed for example, using Arduino IDE, PlatformIO (VS Code), ESP-IDF or ESPHome. Other local\/remote platforms which have been used for other IPEM boards also include LabVIEW and Zabbix. Using the NB-IoT integration, MQTT type messages could be integrated locally, or remotely, or both.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"cl-preview-section\"\u003e\n\u003cp\u003eUsing the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/DitroniX\/IPEM-Plus-ESP32-C5-LoRa-LoRaWAN-IoT-Mains-Power-Energy-Monitor\/wiki\/RS%E2%80%90485\"\u003eRS485 interface\u003c\/a\u003e, messages could also be sent locally over a ‘twisted pair’, up to typical maximum distance of 1,200 meters (4000 feet). This is ideal for local hard wired installations where multiple\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIPEM NB-IoT\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eboards, and other RS485 devices, could sit on the same multi-point network.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"cl-preview-section\"\u003e\n\u003cp\u003eConfiguration has been designed to be flexible but as easy as possible to implement using jumpers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"cl-preview-section\"\u003e\n\u003cp\u003e\u003cstrong\u003eHome | Industry | Housing | Educational | Farming | Agriculture | Solar | Energy\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"cl-preview-section\"\u003e\n\u003cp\u003eUsing its 2.4GHz and 5GHz Wi-Fi, Thread and Zigbee ESP32-C5 radio module, you can use\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIPEM NB-IoT\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eto connect to a whole range of Smart Monitoring applications and projects.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"cl-preview-section\"\u003e\n\u003cp\u003eExtending further, the built-in GPRS NB-IoT GSM radio opens up long range and fully remote monitoring.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"cl-preview-section\"\u003e\n\u003ch3 id=\"how-does-the-power-energy-monitor-work\"\u003eHow does the Power Energy Monitor Work?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"cl-preview-section\"\u003e\n\u003cp\u003eA power energy monitor is a device that safely samples the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/DitroniX\/IPEM-NBIoT-ESP32C5-ATM90E36-SIM7070G-GPRS-IoT-Mains-Power-Energy-Monitor\/wiki\/What-is-a-Power-Energy-Monitor%3F\"\u003eAC Voltage, and Current flow\u003c\/a\u003e, from one, or more, electrical phases, and from this, derives a range of accurate mains power measurements which can then be used for smart metering, or energy monitoring purposes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"cl-preview-section\"\u003e\n\u003cp\u003eThese individual measurements can then be extrapolated into a range of useful real-time data such as total RMS Power, Active, Re-Active Power, Harmonic Power, Power Factor, Phase Angles, Frequency, etc.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"cl-preview-section\"\u003e\n\u003cp\u003eThis real-time data can then be sent via Wi-Fi, NB-IoT, or RS485, through to IoT Home and Industrial Energy Monitoring systems like\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.home-assistant.io\/docs\/energy\/\"\u003eHome Assistant\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"cl-preview-section\"\u003e\n\u003ch3 id=\"supports-ac-monitoring-around-the--world\"\u003eSupports AC Monitoring Around The\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/en.wikipedia.org\/wiki\/Mains_electricity_by_country\"\u003eWorld\u003c\/a\u003e\n\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"cl-preview-section\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eEurope and UK\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ewhich typically is 230 V @ 50 Hz\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWith ranges around 216 V to 253 V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eUSA and Canada\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ewhich typically is 120 V or 230 V @ 60 Hz\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWith ranges around 114 V to 126 V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eJapan\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ewhich typically is 100 V @ 50 Hz or 60 Hz\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEastern Japan is 50 Hz, and Western Japan is 60 Hz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eWorld\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003etypically is 220V-240 V @ 50 Hz\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"cl-preview-section\"\u003e\n\u003ch3 id=\"voltage-and-current-monitoring\"\u003eVoltage and Current Monitoring\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"cl-preview-section\"\u003e\n\u003cp\u003eAll AC Mains is safely and galvanically isolated using a low voltage transformer. Examples are bell transformers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"cl-preview-section\"\u003e\n\u003cp\u003eFlexible monitoring of both AC Voltage and AC Current is important for any installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"cl-preview-section\"\u003e\n\u003cp\u003eThe below links go into more detail of these options.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"cl-preview-section\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/DitroniX\/IPEM-NBIoT-ESP32C5-ATM90E36-SIM7070G-GPRS-IoT-Mains-Power-Energy-Monitor\/wiki\/AC-Mains-Voltage-Sense-Input\"\u003eAC Voltage Monitoring\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"cl-preview-section\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/DitroniX\/IPEM-NBIoT-ESP32C5-ATM90E36-SIM7070G-GPRS-IoT-Mains-Power-Energy-Monitor\/wiki\/AC-Current-and-Power-Monitoring\"\u003eAC Current Monitoring\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"cl-preview-section\"\u003e\n\u003ch3 id=\"ipem-continuity\"\u003eIPEM Continuity\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"cl-preview-section\"\u003e\n\u003cp\u003eFollowing in the footsteps of the original popular\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/DitroniX\/IPEM-IoT-Power-Energy-Monitor\"\u003eIPEM boards\u003c\/a\u003e, this\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIPEM NB-IoT\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis the latest in IoT Mains Energy Monitoring for Home and Industry Automation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"cl-preview-section\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPEM NB-IoT\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a self-contained ESP32-C5 based IoT monitoring board. Ideal for local, or remoting, monitoring requirements.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"font-size: 0.875rem;\"\u003eIPEM NB-IoT\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e \u003c\/span\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003econnectivity allows Wi-Fi connections to 2.4GHz or 5GHz, with Bluetooth, Thread and Zigbee. In addition, you may also use the inbuilt NB-IoT GPRS SIM7070G.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"cl-preview-section\"\u003e\n\u003ch3\u003eInformation\u003c\/h3\u003e\n\u003cp\u003eFurther information maybe found on \u003ca href=\"https:\/\/github.com\/DitroniX\/IPEM-NBIoT-ESP32C5-ATM90E36-SIM7070G-GPRS-IoT-Mains-Power-Energy-Monitor\"\u003eGitHub\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DitroniX","offers":[{"title":"Default Title","offer_id":53416082538824,"sku":"IPEM-NBIOT-ESP32C5-GPRS","price":99.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8507\/9368\/files\/IPEM_NB-IoT-_Product_Features.png?v=1782824669"}],"url":"https:\/\/ditronix.net\/collections\/latest-boards.oembed","provider":"DitroniX","version":"1.0","type":"link"}