DX-WREN 1 Consumer Edition

£69.00 Inc. VAT

Add Comfort to your Home Automation – This is a Smart Home Device

The new DitroniX WREN 1 has been designed to easily, and safely, retrofit to industry standard Electric Reclining Chairs.

WREN could also be used for a range of other DC controlled applications.

The principle function of WREN, is to interface to existing electric recliner push buttons (or remote hand controller), and provide both existing electric reclining chair functionality, while also allowing control from IoT Home Automation.

Designed and Made in Great Britain

Expected availability of the Consumer Version is October 2020. FREE Shipping to UK.

Expected March 2021

Description

Add Comfort to your Home Automation – This is a Smart Home Device

The new DitroniX WREN 1 has been designed to easily, and safely, retrofit to industry standard Electric Reclining Chairs.  WREN could also be used for a range of other DC controlled applications.

The principle function of WREN, is to interface to existing electric recliner push buttons (or remote hand controller), and provide both existing electric reclining chair functionality, while also allowing control from IoT Home Automation.

  • Simple to Fit – Plug and Play (Standard 5 Pin DIN)
  • Existing Recliner Manual Button Controls are Unaffected
  • Existing Recliner Accessory Devices, such as USB power, is Unaffected
  • Voice Control such as via Google Home and Amazon Alexa
  • Manual or Remote Control from PC, Phone or Tablet
  • No External Power Required (Uses existing 24V, or 29V, DC)
  • Controls Single, or Dual, Motor Riser Recliner Chairs
  • Safe to Use. FCC and CE Approved. WiFi 2.4 GHz
  • Isolated Controls Input and Motor Output, allowing parallel operation

 

In The Box

WREN is supplied ready for use and installation to your recliner.

You will need to setup this Home Automation Device according to its provided instructions.

 

Other Details

A developer kit version of this is available.  WREN 1 Developer Edition

Further information may be found in our downloads and Wiki pages

Specification

WREN 1 Technical Specification Overview (Further details may be found in our Wiki)

  • Operating Voltage: 24V DC  (Min 12V – Max 30V DC)
  • Operating Current (Excluding Motors): Max 0.5A
  • Idle Current: Approx 50 mA
  • Sleep Current: Approx 10 uA
  • Onboard PSU: Buck Boost for Regulated Internal 3V3
  • Operating Current : Max 2.8A RMS DC (x 2 channels)
  • Operating Temperature Range Maximum: -25 ~ 85 °C
  • Operating Temperature Range Declared: 0 ~ 40 °C
  • Duty Cycle: Typically Duty Cycle 10% Time On in 2 Minutes.
  • Safety:
    • Thermal Shutdown
    • Non-dissipative over-current protection
    • Cross Conduction Protection
    • Under Voltage Lockout
    • Integrated Fast Free Wheeling Diodes
    • Isolated DMOS Power Transistors with CMOS and Bi-Polar circuits

WREN Product Version Comparison

Further information may be found in our downloads and Wiki pages

Comparison

WREN Features and FlexibilityWREN 1
(Consumer Edition)
WREN S2 SDK
(Developer Edition)
WREN 12S SDK
(Maker Edition)
Product TypeComplete and ready to connect to your electric reclining chairComplete SMT PCB, tested and ready for developing software and experimentingComplete SMT PCB, tested and ready for developing software and experimenting
Simple to Fit – Plug and Play (Standard 5 Pin DIN)YesYes, with optional cableYes, with optional cable
Safe to Use. YesYesYes
Existing Recliner Manual Button Controls are UnaffectedYesYesYes
Connector5 Pin DIN Male and Female2 x 6 Pin Headers2 x 6 Pin Headers
Voice Control from Google Home and Amazon AlexaYesDeveloper ControlledDeveloper Controlled
Manual or Remote Control from PC, Phone or TabletYesDeveloper ControlledDeveloper Controlled
No External Power Required (Uses existing 24V, or 29V, DC)YesYes. Input/Output 12V-30VYes. Input/Output 12V-30V
Wifi Remote ControlYesDeveloper ControlledDeveloper Controlled
Voice Control for Home AutomationYesDeveloper ControlledDeveloper Controlled
Controls Single, or Dual, Motor Riser Recliner ChairsYesDeveloper ControlledDeveloper Controlled
Parallel for Increased Drive Current NoDeveloper ControlledDeveloper Controlled
MCU and WiFi ModuleEspressif ESP32-S2Espressif ESP32-S2Ai-Thinker ESP-12S (ESP8266 Family)
FCC and CE (RED) Approved. WiFi 2.4 GHzYesYesYes
Isolated Controls Input and Motor Output, allowing parallel operationYesDeveloper ControlledDeveloper Controlled
Operating VoltageInput/Output Standard 24V or 29V DCInput/Output 12V to 30V DCInput/Output 12V to 30V DC
Operating Voltage: Min 12V – Max 30V DCNoYesYes
Operating Current (Excluding Motors): Max 0.5AYesYesYes
Idle Current: Approx 50 mAYesDeveloper ControlledDeveloper Controlled
Sleep Current: Approx 10 uANoDeveloper ControlledDeveloper Controlled
Onboard 3V3 PSUYesYesYes
Operating Current : Max 2.8A RMS DC (x 2 channels)YesYesYes
Operating Temperature Range Maximum: -25 ~ 85 °CYesYesYes
Operating Temperature Range Declared: 0 ~ 40 °CYesYesYes
Duty Cycle: Typically Duty Cycle 10% Time On in 2 Minutes.YesDeveloper ControlledDeveloper Controlled
Safety: Thermal ShutdownYesYes, Developer ControlledYes, Developer Controlled
Safety: Non-dissipative over-current protectionYesYesYes
Safety: Cross Conduction ProtectionYesYesYes
Safety: Under Voltage LockoutYesYesYes
Safety: Integrated Fast Free Wheeling DiodesYesYesYes
Safety: Isolated DMOS Power Transistors with CMOS and Bi-Polar circuitsYesYesYes
Open Source DeveloperNoYesYes
UART Flashing PortYesYesYes
USB Flashing PortNoYesNo
USB 5V Power In Port (ESP)NoYesNo
DC Supply Pass-ThroughYesYesYes
JTAG PortNoYesNo
I2C Expansion PortNoYesYes
SPI Expansion PortNoYesNo
Dual DMOS Full Brider DriverYesDeveloper ControlledDeveloper Controlled
Digital Temperature Sensor (TMP102)YesDeveloper ControlledDeveloper Controlled
RGB LEDYesDeveloper ControlledDeveloper Controlled
Reset ButtonYesDeveloper ControlledDeveloper Controlled
ProgrammedYesDeveloper ControlledDeveloper Controlled
Sealed EnclosureYesNo. Enclosure available separately.No. Enclosure available separately.
Software Developer KitNoYesYes
Open Source SupportNoYesYes
Supplied
Complete, tested and ready to safely DIY install

In tested software developer kit form, ready for developer and end user use.
Enclosure/Cables Optional.

In tested software developer kit form, ready for developer and end user use.
Enclosure/Cables Optional.
Special Offer Introductory PriceOnly £59 (Normally £69)Only £19.99 (Normally £29.99)Only £19.99 (Normally £29.99)
New Product Availability.
Back Orders Taken Now.
September/October 2020September 2020September 2020
Add your WREN to the cart now and save from normal price!WREN1-DE
WREN 1 Consumer Edition
DXWRENS2-DE
WREN S2 SDK Developer Edition
DXWREN12S-ME
WREN 12S SDK Maker Edition

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.