USB 2.0 to UART TTL 6 Pin 3.3V and 5V Power

Description

This is a USB 2.0 to UART Converter Module CP2102 and is supplied with a 20mm 6 way Female to Female DuPont 2.54mm Pitch Ribbon

Connections

• 6 Pin Header
  • DTR
  • RXD
  • TXD
  • 5V
  • GND
  • 3V3
• PCB
  • RTS
  • CTS
  • DSR
  • DCD
  • RST
  • R
  • SUS
  • /SUS

DC Output

• 5V
• 3V3

LEDs

• 3 x LEDs
  • Data RX, TX and Working Status

Supports

• Included USB transceiver, without external circuit device
• Includes a clock circuit and power-on reset circuit
• Meet the USB2.0 specification requirements
• SUSPEND pin supports USB suspend state
• Asynchronous serial data bus compatible with all handshake and modulation controller interface signals
• Supported data format is 8 data bits, 1 stop bit and parity bits
• Connotation 512 byte receive buffer and 512 byte transmit buffer
• Supports hardware handshaking or X-ON/X-OFF

PCB Dimensions:

• 26.5mm x 15.6mm

Supported operating systems.

• Windows 98/Me/2000/7 through to Windows 10 and 11.
• Ubuntu
• MAC OS-9.
• MAC OS.
• X-Windows CE.
• Linux 2.40 or later.

In the Box

• 1 x USB to UART Module
• 1 x 20mm 6 way Female to Female DuPont 2.54mm Pitch Ribbon

Note regarding the UART cable.

The 6 pin UART header does NOT align with the 6 pin header on our SDKs.  The reason being is that the SDK requires the RTS (to automatically flash without pressing any buttons), which is not exposed to a header pin and equally we do not use the 5V supply as our SDKs flash on 3V3.

Simply either cut off one header socket and solder the pints to the UART or separate the RTS and 5V.  Details are in the Wiki.

Shipping

All products in stock will be posted same day, where possible.  Postage is at cost and flat rate, irrespective of order size.

Any product not is stock, which is back-ordered, will be shipped as soon as it becomes available.  Notifications are sent automatically.

Should only part of your order be in stock, then we would normally send available item(s), and balance when available. Should you wish to not split the order, please comment to use.

 

Other Details

Further information on this product may be found in our downloads and Wiki pages.  Other technical information and code examples are also shared in our GitHub Pages.  Project information may also be found on Hackster.io

We value our customers and should you have any other questions, please feel free to contact us.

 

All our boards and related products are Designed and Manufactured in Great Britain.  This site is a subset of DitroniX.Com

Supporting the engagement, interest and careers of people, of all ages, through the fascinating World of STEM Learning and Amateur Radio & Electronics.  DitroniX, planting a seed in Electronics, for our future engineers.

Related