OLED Display Module 0.6″ I2C SSD1306

£3.95 Inc. VAT

0.6″ (24×24.7×3.7mm) OLED provides a clear and easy to read display.

In Stock

Title Range Discount
5% 2 - 4 5%
7.5% 5 - 9 7.5%
10% 10 + 10%
SKU: OLED06I2C Category: Tags: , , , ,

Description

OLED Display 

This 0.6″ (24×24.7×3.7mm) OLED provides a clear and easy to read display – both text and graphics, inverted and non-inverted.

  • Interfacing is via standard I2C serial and is straight forward to use.
  • The display integrates directly with our boards, via the on-board header, such as GTEM, CWX, LMIC etc.

 

Examples of an OLED display module on a LMIC board (note, protective film left on).

 

 

Specification

OLED specification overview:

  • High resolution: 128 * 64 (the same resolution as 1286LCD, but more pixels per unit area of OLED screen)
  • Wide viewing angle: more than 160 degrees
  • Low power consumption: 0.06W in normal display
  • Wide power supply range: 3.3V to 5V
  • Operating temperature range: – 30 ℃ to 80 ℃
  • Volume: white, blue: 27 * 24.7 * 3.7mm
  • Size 7.9 * 27 * 3.8mm
  • Communication mode: I2C
  • Backlight: OLED self illumination, no backlight required
  • Brightness: contrast can be controlled by program command
  • Service life not less than 16000 hours
  • OLED screen internal driver chip: SSD1306

 

Pin definition

  • Interface type: IIC / I2C interface
  • GND: Ground
  • VDD:+ 3.3V to 5V
  • SCL: I2C Serial clock
  • SDA: I2C Serial Data

 

 

Code

Our GitHub has a number of example code samples which will drive this OLED.

Example setting

GyverOLED<SSD1306_128x64, OLED_BUFFER> oled;

 

 

In the Box

  • 1 x 0.6″ OLED Display
  • 4 Pin Header

 

Shipping

All products in stock will be posted same day, where possible.  Postage is at cost and flat rate, irrespective of order size.

Any product not is stock, which is back-ordered, will be shipped as soon as it becomes available.  Notifications are sent automatically.

Should only part of your order be in stock, then we would normally send available item(s), and balance when available. Should you wish to not split the order, please comment to use.

 

Other Details

Further information on this product may be found in our downloads and Wiki pages.  Other technical information and code examples are also shared in our GitHub Pages.  Project information may also be found on Hackster.io

We value our customers and should you have any other questions, please feel free to contact us.

 

Specification

OLED specification overview:

  • High resolution: 128 * 64 (the same resolution as 1286LCD, but more pixels per unit area of OLED screen)
  • Wide viewing angle: more than 160 degrees
  • Low power consumption: 0.06W in normal display
  • Wide power supply range: 3.3V to 5V
  • Operating temperature range: – 30 ℃ to 80 ℃
  • Volume: white, blue: 27 * 24.7 * 3.7mm
  • Size 7.9 * 27 * 3.8mm
  • Communication mode: I2C
  • Backlight: OLED self illumination, no backlight required
  • Brightness: contrast can be controlled by program command
  • Service life not less than 16000 hours
  • OLED screen internal driver chip: SSD1306

 

Pin definition

  • Interface type: IIC / I2C interface
  • GND: Ground
  • VDD:+ 3.3V to 5V
  • SCL: I2C Serial clock
  • SDA: I2C Serial Data

 

You may also like…