Shop

Welcome to our DitroniX.net shop.  Products are Designed and Made in Great Britain by DitroniX

SAVE on ‘Mix and Match’ Item Discounts in Cart.    Qty 2-4 = 5%, Qty 5-9 = 7.5% and Qty 10+ = 10%

Loading...

  • All
  • AC Current Monitoring
  • Accessories
  • Consumer
  • DC Current Monitoring
  • Energy Monitoring
  • HAMKit
  • IoT Home Automation
  • Solar Energy Gadgets
  • Weather Station

  • CMIS-1 ESP32 Current Monitor IoT Sensors Board

    CMIS is a Current Monitor IoT Sensor board, based on an ESP32 WROOM, designed for Home Automation for monitoring up to four 100A - fully isolated AC/DC currents. New product
    £46.00 Inc. VAT

  • CWX-1 ESP8266 Compact IoT Weather Station

    CWX-1-BME280 -  STEM SDK IoT (Compact Weather Station IoT Home Automation)
    £25.00 Inc. VAT

  • CWX-2 ESP8266 BME280 Compact IoT Weather Station

    CWX-2 is a Compact IoT Weather Station, based on an ESP8266, which interfaces to a BME280 Weather Sensor and SFH2440 Ambient Light sensor.  This board is designed to interface any Home Automation System. New product - stock due December 2022. Advanced back orders being taken.
    £34.00 Inc. VAT

  • DS18B20 Digital Temperature Waterproof Sensor Probe

    This DS18B20 Digital Temperature Waterproof Sensor is an accessory to the RMIS and CWX SDK projects but great for other projects too.
    £3.00 Inc. VAT

  • EMIS-1 ESP32 Energy Monitor IoT Sensors Board

    EMIS, Energy Monitor IoT Sensors board, based on an ESP32 WROOM, designed to monitor AC or DC Current, with interfaces to RS232 and RS485.    This board is designed to interface any Home Automation System. New product - stock due December 2022. Advanced back orders being taken.
    £39.00 Inc. VAT

  • Enclosure ABS Case with Waterproof Clear Cover

    This enclosure is a smart looking ABS case, complete with a waterproof clear cover.
    £9.99 Inc. VAT

  • GTEM-1 ESP32 ATM90E26 Energy Monitor Board

    GTEM, Grid Tie Energy Monitor board, based on an ESP32 WROOM and designed for a Home Automation system to monitor the mains supply using the on-board ATM90E26 Energy Monitor device. New product - stock due December 2022. Advanced back orders being taken.
    £30.00 Inc. VAT

  • GTIE-1 ESP8266 GTIL Extender Mains Current Clamp Monitor Board

    GTIE is a Grid Tie Inverter Extender board, based on an ESP8266, which interfaces to a Mains Current Clamp for remote monitoring of AC current.  This board is designed to interface any Home Automation System. New product - stock due December 2022. Advanced back orders being taken.
    £24.00 Inc. VAT

  • LMIC-1 ESP8266 Linear Motor IoT Controller Board

    LMIC is a DC Linear Motor IoT Controller, based on an ESP8266, with Hardware Safety Features.  This board is designed to interface any Home Automation System. New product - stock due December 2022. Advanced back orders being taken.
    £33.00 Inc. VAT

  • RMIS-1-60 ESP8266 Remote Monitoring IoT System 60V 30A 4 Channel Board

    RMIS is an ESP8266 based Home Automation board that will monitor four separate DC Current and DC Voltage channels.
    £30.00 Inc. VAT

  • RPEM-1- Remote Power Energy Monitor Board

    RPEM, is an ESP8266 based board which interfaces up to four CT Current Clamps, OPTO Meter Reader and RS-485 Interface.  This board is designed to interface any Home Automation System. New product - stock due December 2022. Advanced back orders being taken.
    £39.00 Inc. VAT

  • USB 2.0 to UART TTL 6 Pin 3.3V and 5V Power

    £4.00 Inc. VAT

  • VDAS-1.2 Video Detect Audio Squelch Board

    VDAS (Video Detect and Audio Squelch), is a small board (Size 45mm x 20mm x 5mm - excluding BNC), that simply detects video sync (taken from an ATV receiver for example), and then provides a couple of outputs depending on the video state.

  • WREN Enclosure/Cable Kit

    This Enclosure and Cable kit contains: Quality ABS Enclosure and Glands Quality Electric Recliner Cables
    £19.99 Inc. VAT

  • WREN-2 ESP8266 Single/Dual Linear Motor Controller Board

    WREN is based on the popular ESP8266, in order to easily control Linear Motors in Electric Reclining Chairs and Beds, from a Home Automation system.
    £24.99 Inc. VAT

  • CMIS-1 ESP32 Current Monitor IoT Sensors Board

    CMIS is a Current Monitor IoT Sensor board, based on an ESP32 WROOM, designed for Home Automation for monitoring up to four 100A - fully isolated AC/DC currents. New product

    £46.00 Inc. VAT

  • EMIS-1 ESP32 Energy Monitor IoT Sensors Board

    EMIS, Energy Monitor IoT Sensors board, based on an ESP32 WROOM, designed to monitor AC or DC Current, with interfaces to RS232 and RS485.    This board is designed to interface any Home Automation System. New product - stock due December 2022. Advanced back orders being taken.

    £39.00 Inc. VAT

  • GTEM-1 ESP32 ATM90E26 Energy Monitor Board

    GTEM, Grid Tie Energy Monitor board, based on an ESP32 WROOM and designed for a Home Automation system to monitor the mains supply using the on-board ATM90E26 Energy Monitor device. New product - stock due December 2022. Advanced back orders being taken.

    £30.00 Inc. VAT

  • GTIE-1 ESP8266 GTIL Extender Mains Current Clamp Monitor Board

    GTIE is a Grid Tie Inverter Extender board, based on an ESP8266, which interfaces to a Mains Current Clamp for remote monitoring of AC current.  This board is designed to interface any Home Automation System. New product - stock due December 2022. Advanced back orders being taken.

    £24.00 Inc. VAT

  • RPEM-1- Remote Power Energy Monitor Board

    RPEM, is an ESP8266 based board which interfaces up to four CT Current Clamps, OPTO Meter Reader and RS-485 Interface.  This board is designed to interface any Home Automation System. New product - stock due December 2022. Advanced back orders being taken.

    £39.00 Inc. VAT