EMIS-1 Test Code OLED

EMIS (Energy Monitoring IoT Sensors), SDK Kit is based on an Espressif ESP32 WROOM and the board has an I2C header designed for easy OLED connection. Displays random number between 0 and 99 and updates battery percentage.  Heartbeat RED LED flashes each loop cycle. You will need to select your OLED Display.  Uncomment/Comment as needed. […]

EMIS-1 Test Code Wifi

EMIS (Energy Monitoring IoT Sensors), SDK Kit is based on an Espressif ESP32 WROOM, which incorporated 2.4GHz Wireless. This code simply communicates with the 2.4GHz Wireless and scans for available Access Point or Router networks. Example Arduino code below.

EMIS-1 Test Code RGB LED

EMIS (Energy Monitoring IoT Sensors), SDK Kit contains an RGB LED.  This basic code is used to test the RGB LED. RED LED is on GPIO 2 Green LED is on GPIO 4 Blue LED is on GPIO 15 The separate POWER LED is RED and is always on. Note that in the default state, […]

RPEM ESP8266 SDK V1 – Connections

RPEM v1 is a STEM project, providing a flexible Remote Power Energy Monitor SDK for your Green Solar/Wind/Battery/Inverter Energy System. The SDK is designed to be as flexible as possible for the Home Automation enthusiast.   DC Input can be taken from a power supply or existing battery. Typically, this is between 6V and 15V.  […]

RPEM-1 PCB

RPEM v1 is a STEM project, providing a flexible Remote Power Energy Monitor SDK for your Solar/Wind/Battery/Inverter System. The PCB uses Surface Mount Technologies and is size designed to fit into a Hammond 1553D Enclosure. Size of the PCB is only 70 mm x 60 mm All SMT components, with exception to the DC Input […]

RPEM ESP8266 SDK V1 – Specification

RPEM v1 is a STEM project, providing a flexible Remote Power Energy Monitor SDK for your Solar/Wind/Battery/Inverter System. The SDK Kit is available: RPEM-1-C with four x SMT current clamp 3.5mm sockets mounted. RPEM-1-V without the sockets, for four x voltage monitoring.     The RPEM SDK has been designed to be as flexible as […]