Tag: DAC Out
-
IPEC Power Energy Monitor Board Overview
An overview of the IPEC board, showing the various connections and options available. The board was designed to be compact, flexible and functional, combined with safe and expandable features.
-
IPEC Boards in Stock
IPEC, IoT Power Energy Controller and Monitor SDK boards, are in, successfully tested and available for purchase! The first production batch of both IPEC board variants (ESP32E and ESP32UE), have gone through Configuration, Flashing, Bring up, Calibration and Final Testing. All looking good. The development firmware release I hope to complete this week and upload…
-
Mains and Solar Power Energy Monitor Boards SDK Overview
The below guide shows the Mains and Solar Power Energy Monitor Board options available. With three current models of Power Energy Monitors, three ATM devices (ATM90E26, ATM90E32 and ATM90E36), and two variants of ESP32-WROOM (32E with PCB Antenna and 32UE with U.FL for External Antenna), this guide should assist in selecting the right board for…
-
Preliminary Info – EPEM ESP32 ATM90E32 Ethernet IoT Power Energy Monitor
EPEM follows in the successful development footsteps of the IPEM and IPEC Power Energy Monitoring Boards. EPEM is an Ethernet Power Energy Monitor and Controller. 3 Phase, or 3 x Single Phases, with DAC/PWM/MPWM/MPPT/I2C Expansion Port Outputs. For remote Solar Power Energy installations which have no/limited WiFi coverage, EPEM is an Ethernet based Power Energy Monitor and Controller. *…
-
IPEC and IPEC DAC PWM MPPT Output Testing
The below two videos show the IPEC board outputting PWM and DAC voltages, which are directly controlled via the IPEC ATM90E32 and CT Clamp Input. A current clamp is connected to a variable ramping mains AC load and this is then used to test the IPEC board, which is automatically outputting to the DAC and…
-
IPEC and IPEX Beta Update
Both the IPEC and IPEX BETA boards have been undergoing initial bring up and beta testing – which is going very well and all positive for the first test release. Development firmware has also evolved to supporting the ADC, DAC and PWM Outputs. This is the biggest amount of time has been spent on bring-up. …
-
New Energy Monitoring PCBs and Testing
The new PCBs for EMIS and CMIS have arrived. These have been populated and going through full functional testing. CMIS Current Monitor IoT Sensors, SDK Kit. EMIS (Energy Monitoring IoT Sensors), SDK Kit
-
New EMIS-1 ESP32 SDK Solar Systems – Energy Monitoring IoT Sensors
New Product for September – Pre-release – Details to Follow Shortly. EMIS, is an ESP32 based Energy Monitoring SDK, with a range of sensors, complete with UART, RS232 and RS485. ESP32 AT24C64 EEPROM Isolated Current Input Current Sensor AC/DC 100A ADC 12-bit Resolution (ESP32) Meter Pulse Sensor Input CT Clamp Input Isolated Relay Output 2A…
-
New CMIS ESP32 SDK Battery System – Current Monitor IoT System
New Product for September – Pre-release – Details to Follow Shortly. CMIS, is an ESP32 based AC and DC Current Monitor IoT System, providing four isolated 100A Hall Effect Sensors. ESP32 AT24C64 EEPROM 4 x Isolated Current Inputs Current Sensors AC/DC 100A ADC 12-bit Resolution (ESP32) CT Clamp Input On-board Temperature Sensor USB UART (CH340)…
-
New RPEM Remote Power Energy Monitor SDK
RPEM v1 is a STEM project, providing a flexible Remote Power Energy Monitor SDK for your Green Solar/Wind/Battery/Inverter Energy System. New Product for September – Pre-release – Details to Follow Shortly. Photo of prototype PCB, with optional plug-in OLED display. RPEM v1 Main Integrated Features Core ESP-12S MCU EEPROM 27C64 (64kbit | 8K x 8bit)…